Design and Characterization of Silane-Modified Bio-Based Non-Isocyanate Polyurethane Coatings for Advanced Surface Applications
Materials · 10.12.2025 · 18 (24) · 5551
DOI: 10.3390/ma18245551 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 10.12.2025. Verfasst von Rutu Patel und 3 weiteren Autor:innen. Beteiligte Einrichtung: National Institute for Materials Advancement, Pittsburg State University, 1204 Research Road, Pittsburg, KS 66762, USA. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Non-isocyanate polyurethanes (NIPUs) represent a sustainable alternative to conventional isocyanate-based systems, eliminating toxic reagents while maintaining good performance. In this study, bio-based NIPU coatings were synthesized from carbonated soybean oil (CSBO) via the carbonation of epoxidized soybean oil (ESBO) using carbon dioxide (CO2), followed by polymerization with ethylenediamine (EDA) and varying concentrations of 3-aminopropyltriethoxysilane (APTES) (0–20 wt%). The amine groups of EDA and APTES participate in the ring-opening of cyclic carbonates to form β-hydroxyurethane linkages, while the triethoxysilane moieties of APTES may undergo hydrolysis–condensation to produce Si–O–Si domains, resulting in a β-hydroxyurethane–siloxane hybrid network. The optimized formulation CEA-5 exhibited the best, including a tensile strength of 3.3 MPa, elongation at break of ~150%, glass transition temperature (Tg) of ~7 °C, and thermal stability up to ~350 °C, where major thermal degradation happens. The synthesized coating material also shows adhesion (3.6 MPa on oak for CEA-10), hydrophobic behavior (water contact angle (WCA) ~102° for CEA-5), good chemical and ultraviolet (UV) resistance, and shape memory. The synergistic effect of urethane hydrogen bonding and siloxane crosslinking imparted enhanced toughness, flexibility, and durability. These findings express a scalable, eco-friendly strategy for producing silane-modified NIPU coatings with good mechanical, thermal, and coating performance suitable for sustainable industrial coating and adhesive applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- National Institute for Materials Advancement, Pittsburg State University, 1204 Research Road, Pittsburg, KS 66762, USA.
- Department of Physics, Pittsburg State University, 1701 S Broadway St., Pittsburg, KS 66762, USA.
- Department of Chemistry, Pittsburg State University, 1701 S Broadway St., Pittsburg, KS 66762, USA.
ORCID-Profile: Rutu Patel, Mayankkumar L Chaudhary, Ram K Gupta
Zitieren
APA
Patel, R., Kumar, A., Chaudhary, M. L., & Gupta, R. K. (2025). Design and Characterization of Silane-Modified Bio-Based Non-Isocyanate Polyurethane Coatings for Advanced Surface Applications. Materials, 18(24), 5551. https://doi.org/10.3390/ma18245551
Vancouver
Patel R, Kumar A, Chaudhary ML, Gupta RK. Design and Characterization of Silane-Modified Bio-Based Non-Isocyanate Polyurethane Coatings for Advanced Surface Applications. Materials. 2025;18(24):5551. doi:10.3390/ma18245551
BibTeX
@article{Patel2025,
author = {Patel, Rutu and Kumar, Ajay and Chaudhary, Mayankkumar L and Gupta, Ram K},
title = {Design and Characterization of Silane-Modified Bio-Based Non-Isocyanate Polyurethane Coatings for Advanced Surface Applications},
journal = {Materials},
year = {2025},
volume = {18},
number = {24},
pages = {5551},
doi = {10.3390/ma18245551}
}
EUVIMED