Aluminum Spent Foundry Sand as an Emergent Raw Material in the Production of a Sustainable Aluminosilicate Refractory Castable
Materials · 07.12.2025 · 18 (24) · 5500
DOI: 10.3390/ma18245500 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 07.12.2025. Verfasst von Jesús Fernando López-Perales und 6 weiteren Autor:innen. Beteiligte Einrichtung: Facultad de Ingeniería Mecánica y Eléctrica (FIME), Universidad Autónoma de Nuevo León (UANL), San Nicolás de los Garza 66450, Mexico. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 69 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Metal casting industries generate substantial quantities of spent foundry sand (SFS), a silica- and alumina-rich by-product that remains underutilized, with recycling rates below 30%. This study explores the incorporation of aluminum SFS as a secondary raw material in aluminosilicate refractory castables to promote sustainable waste valorization and circular economy practices. Refractory mixtures were prepared with bauxite, kyanite, calcium aluminate cement, microsilica, and flint clay, where fine flint clay was partially replaced by aluminum SFS at 0, 5, 10, and 15 wt.%. Samples were dried at 120 °C and sintered at 850, 1050, and 1400 °C for 4 h. Bulk density, apparent porosity, cold crushing strength, and modulus of rupture were measured, while phase and microstructural evolution were examined by XRD and SEM. The 5 wt.% SFS-containing castable exhibited comparable strength and density to the reference formulation, attributed to the formation of secondary mullite and anorthite that improved matrix cohesion. Higher SFS contents (10–15 wt.%) increased porosity and reduced strength due to excess SiO2 and silica polymorphism. These results demonstrate the technical feasibility of using aluminum SFS in refractory castables, contributing to resource conservation, waste reduction, and the development of environmentally sustainable refractory materials for high-temperature applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Facultad de Ingeniería Mecánica y Eléctrica (FIME), Universidad Autónoma de Nuevo León (UANL), San Nicolás de los Garza 66450, Mexico.
- Departamento de Mecánica, Facultad de Ingeniería, Universidad Veracruzana Campus Coatzacoalcos (UV), Coatzacoalcos 96535, Mexico.
- Centro de Investigación en Nanomateriales y Nanotecnología (CINN), Consejo Superior de Investigaciones Científicas (CSIC), Universidad de Oviedo (UO), Principado de Asturias (PA), Avda. de la Vega, 4-6, 33940 San Martín…
ORCID-Profile: Jesús Fernando López-Perales, Leonel Díaz-Tato, Yadira González-Carranza, Daniel Fernández-González, Edén Amaral Rodríguez-Castellanos
Zitieren
APA
López-Perales, J. F., Díaz-Tato, L., González-Carranza, Y., Contreras de León, J. E., Gómez-Rodríguez, C., Fernández-González, D., & Rodríguez-Castellanos, E. A. (2025). Aluminum Spent Foundry Sand as an Emergent Raw Material in the Production of a Sustainable Aluminosilicate Refractory Castable. Materials, 18(24), 5500. https://doi.org/10.3390/ma18245500
Vancouver
López-Perales JF, Díaz-Tato L, González-Carranza Y, Contreras de León JE, Gómez-Rodríguez C, Fernández-González D, et al. Aluminum Spent Foundry Sand as an Emergent Raw Material in the Production of a Sustainable Aluminosilicate Refractory Castable. Materials. 2025;18(24):5500. doi:10.3390/ma18245500
BibTeX
@article{LpezPerales2025,
author = {López-Perales, Jesús Fernando and Díaz-Tato, Leonel and González-Carranza, Yadira and Contreras de León, José Eulalio and Gómez-Rodríguez, Cristian and Fernández-González, Daniel and Rodríguez-Castellanos, Edén Amaral},
title = {Aluminum Spent Foundry Sand as an Emergent Raw Material in the Production of a Sustainable Aluminosilicate Refractory Castable},
journal = {Materials},
year = {2025},
volume = {18},
number = {24},
pages = {5500},
doi = {10.3390/ma18245500}
}
EUVIMED