EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Homogenisation of TPMS Architectures: A Comparison Between Finite Element and Mechanics of Structure Genome Approaches

Sara Mouman, Yao Koutsawa iD, Lucas Binsfeld iD, Levent Kirkayak iD, Jieun Yang iD, Gaetano Giunta iD

Materials · 27.11.2025 · 18 (23) · 5357

DOI: 10.3390/ma18235357 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 27.11.2025. Verfasst von Sara Mouman und 5 weiteren Autor:innen. Beteiligte Einrichtung: Luxembourg Institute of Science and Technology, 5 Avenue des Hauts-Fourneaux, L-4362 Esch-sur-Alzette, Luxembourg. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work presents a comparative study on the mechanical homogenisation of Triply Periodic Minimal Surface (TPMS) lattice structures in the linear elastic regime, which have attracted significant interest for their unique ability to combine lightweight design with tailored properties. The study investigates the effective mechanical behaviour of Representative Unit Cells (RUCs) generated using the open-source Python tool Microgen. Two homogenisation strategies are considered: (i) Finite Element (FE)-based homogenisation carried out in Abaqus, and (ii) the Mechanics of Structure Genome (MSG), a unified theory for multi-scale constitutive modelling, implemented in an in-house software tool. The comparison encompasses multiple TPMS topologies, including well-studied cases used for validation, namely gyroid and diamond, as well as less-explored ones, such as PMY and F-Rhombic Dodecahedron, to provide new insights. RUCs are analysed across relative densities ranging from 10 to 50%. Equivalent linear elastic properties (Young’s moduli, shear moduli, and Poisson’s ratios) are derived and compared to assess the consistency, accuracy, and computational efficiency of the two approaches. The results show that both methods yield effective properties with less than 1% difference between them, and less than 5% deviation from experimental data reported in the literature for the effective Young’s modulus. Furthermore, the anisotropy of each TPMS topology across the range of relative densities is examined through the directional distribution of Young’s moduli. The outcomes are expected to clarify the strengths and limitations of FE versus MSG in capturing the effective behaviour of architected cellular solids, thus supporting the selection of homogenisation strategies for the design of lattice-based lightweight structures.

Schlagwörter

Stichwörter der Autor:innen

finite element analysislattice materialsmechanics of structure genomenumerical homogenisationtriply periodic minimal surfaces

Autor:innen und Institutionen

  • Luxembourg Institute of Science and Technology, 5 Avenue des Hauts-Fourneaux, L-4362 Esch-sur-Alzette, Luxembourg.
  • Faculty of Mechanical Engineering, Delft University of Technology, Mekelweg 2, 2628 CD Delft, The Netherlands.

ORCID-Profile: Yao Koutsawa, Lucas Binsfeld, Levent Kirkayak, Jieun Yang, Gaetano Giunta

Zitieren

APA

Mouman, S., Koutsawa, Y., Binsfeld, L., Kirkayak, L., Yang, J., & Giunta, G. (2025). Mechanical Homogenisation of TPMS Architectures: A Comparison Between Finite Element and Mechanics of Structure Genome Approaches. Materials, 18(23), 5357. https://doi.org/10.3390/ma18235357

Vancouver

Mouman S, Koutsawa Y, Binsfeld L, Kirkayak L, Yang J, Giunta G. Mechanical Homogenisation of TPMS Architectures: A Comparison Between Finite Element and Mechanics of Structure Genome Approaches. Materials. 2025;18(23):5357. doi:10.3390/ma18235357

BibTeX
@article{Mouman2025,
  author = {Mouman, Sara and Koutsawa, Yao and Binsfeld, Lucas and Kirkayak, Levent and Yang, Jieun and Giunta, Gaetano},
  title = {Mechanical Homogenisation of TPMS Architectures: A Comparison Between Finite Element and Mechanics of Structure Genome Approaches},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {23},
  pages = {5357},
  doi = {10.3390/ma18235357}
}
Kostenlos starten →