EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Direct Fabrication of Inclined-Sidewall Microgrooves with Shaped Flat-Top Beams

Jianyong Mao iD, Wenqiang Chen, Kai Chen, Xun Li, Yu Tan, Ming Li, Lei Zhang iD

Materials · 17.11.2025 · 18 (22) · 5204

DOI: 10.3390/ma18225204 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 17.11.2025. Verfasst von Jianyong Mao und 6 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory for Physical Electronics and Devices of the Ministry of Education & Shaanxi Key Laboratory of Information Photonic Technique, School o…. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China, Defense Industrial Technology Development Program, National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Microgrooves have demonstrated significant application value across various fields. As a key processing technology, femtosecond laser processing exhibits notable advantages due to its high precision and minimal thermal impact. This study presents a method for fabricating microgrooves with inclined sidewalls using shaped flat-top laser beams. By controlling both the beam shape and scanning parameters, microgrooves with tailored sidewall morphology are produced in a single scan on silicon wafers. The optical performance of the fabricated structures is further evaluated through blazed grating prototypes. The experimental results aligned well with theoretical predictions. These results confirm that the proposed approach provides a viable technical pathway for efficient and high-quality fabrication of functional microstructures on comparable materials.

Schlagwörter

Stichwörter der Autor:innen

beam-controlled morphologydirect laser writingflat-top beammicrogroovesingle-pass 3D ablation

Autor:innen und Institutionen

  • Key Laboratory for Physical Electronics and Devices of the Ministry of Education & Shaanxi Key Laboratory of Information Photonic Technique, School of Electronic Science and Engineering, Xi'an Jiaotong University, Xi'an…
  • State Key Laboratory of Ultrafast Optical Science and Technology, Xi'an Institute of Optics and Precision Mechanics of CAS, Xi'an 710119, China.
  • School of Mechanical Engineering, Shandong University, Jinan 250061, China.

ORCID-Profile: Jianyong Mao, Lei Zhang

Förderung

  • National Key Research and Development Program of China
  • Defense Industrial Technology Development Program
  • National Natural Science Foundation of China

Zitieren

APA

Mao, J., Chen, W., Chen, K., Li, X., Tan, Y., Li, M., & Zhang, L. (2025). Direct Fabrication of Inclined-Sidewall Microgrooves with Shaped Flat-Top Beams. Materials, 18(22), 5204. https://doi.org/10.3390/ma18225204

Vancouver

Mao J, Chen W, Chen K, Li X, Tan Y, Li M, et al. Direct Fabrication of Inclined-Sidewall Microgrooves with Shaped Flat-Top Beams. Materials. 2025;18(22):5204. doi:10.3390/ma18225204

BibTeX
@article{Mao2025,
  author = {Mao, Jianyong and Chen, Wenqiang and Chen, Kai and Li, Xun and Tan, Yu and Li, Ming and Zhang, Lei},
  title = {Direct Fabrication of Inclined-Sidewall Microgrooves with Shaped Flat-Top Beams},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {22},
  pages = {5204},
  doi = {10.3390/ma18225204}
}
Kostenlos starten →