EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of TiB2 Content on Microstructure and Mechanical Properties of TiB2/Al-Zn-Mg-Cu Composites with High Zn Content

Wenchao Sun, Zhilei Xiang, Jihao Li, Zian Yang, Yang Han, Ziyong Chen iD

Materials · 15.11.2025 · 18 (22) · 5191

DOI: 10.3390/ma18225191 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 15.11.2025. Verfasst von Wenchao Sun und 5 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Materials and Manufacturing, Beijing University of Technology, Beijing 100124, China. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The addition of reinforcement particles can considerably improve the mechanical properties of 7xxx series aluminum alloy. In this work, the effects of TiB2 reinforcement particles on the microstructure, mechanical properties, strengthening mechanisms, and aging precipitation of TiB2/Al-Zn-Mg-Cu composites were systematically investigated using scanning electron microscopy (SEM), transmission electron microscopy (TEM), and tensile testing machine. The results indicate that when the TiB2 content is 1 wt.%, the composite achieves a tensile strength of 831 MPa while maintaining an elongation of 6.7%, meeting the research objectives of this experiment. When the aging heat treatment temperature is set at 120 °C, the peak aging time is shortened to 20 h. The interfacial phase composed of solute elements preferentially nucleates near the TiB2 particles during the cooling process. With the increase in TiB2 content, clustering in localized regions slows down the diffusion rate of interfacial phases into the matrix, thereby increasing the required duration of the solution treatment. Excellent interfacial relationships exist between TiB2 particles and both the aluminum matrix and the MgZn2 phase. It is also found that with the increase in TiB2 content, the aging-hardness response of TiB2/Al-Zn-Mg-Cu composites is accelerated and the work hardening rate is reduced. In addition, a multi-component strengthening model for the yield strength of the composite was established based on various strengthening mechanisms, including second-phase strengthening, dislocation strengthening, age-precipitation strengthening, and fine-grain strengthening. The results indicate that age-precipitation strengthening and dislocation strengthening are the most significant contributors to strength in the composite.

Schlagwörter

Stichwörter der Autor:innen

TiB2/Al-Zn-Mg-Cu compositesinterfacesmechanical propertiesmicrostructurepeak aging

Autor:innen und Institutionen

  • Faculty of Materials and Manufacturing, Beijing University of Technology, Beijing 100124, China.

ORCID-Profile: Ziyong Chen

Förderung

  • Natural Science Foundation of China

Zitieren

APA

Sun, W., Xiang, Z., Li, J., Yang, Z., Han, Y., & Chen, Z. (2025). Effect of TiB2 Content on Microstructure and Mechanical Properties of TiB2/Al-Zn-Mg-Cu Composites with High Zn Content. Materials, 18(22), 5191. https://doi.org/10.3390/ma18225191

Vancouver

Sun W, Xiang Z, Li J, Yang Z, Han Y, Chen Z. Effect of TiB2 Content on Microstructure and Mechanical Properties of TiB2/Al-Zn-Mg-Cu Composites with High Zn Content. Materials. 2025;18(22):5191. doi:10.3390/ma18225191

BibTeX
@article{Sun2025,
  author = {Sun, Wenchao and Xiang, Zhilei and Li, Jihao and Yang, Zian and Han, Yang and Chen, Ziyong},
  title = {Effect of TiB2 Content on Microstructure and Mechanical Properties of TiB2/Al-Zn-Mg-Cu Composites with High Zn Content},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {22},
  pages = {5191},
  doi = {10.3390/ma18225191}
}
Kostenlos starten →