EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Laser Shock Peening on High-Cycle Fatigue Performance and Residual Stress in DH36 Welded Joints

Shengguan Qu iD, Yulian Sha, Yi Hou, Jianhua Wang, Fenglei Li, Xiaoqiang Li iD

Materials · 14.11.2025 · 18 (22) · 5178

DOI: 10.3390/ma18225178 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 14.11.2025. Verfasst von Shengguan Qu und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510640, China. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: 2024 Special Project on Marine Economic Development of Guangdong Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

DH36 high-strength steel is widely used in shipbuilding and other fields due to its excellent strength, low-temperature toughness, wear resistance, and corrosion resistance. However, the harsh deep-sea environment seriously reduces the service life of welds. In this study we subjected DH36 welded joints to laser shock peening at three different energy levels (5 J, 7 J, 9 J) to investigate its effects on microhardness, microstructure, high-cycle fatigue, and residual stress of the DH36 welded joints. Results indicate that LSP can significantly enhance the surface microhardness of welded joints. Notably, the 7 J energy treatment increased the weld zone microhardness from 195 HV0.2 to 231 HV0.2 (18.5% improvement) and the heat-affected zone microhardness from 194 HV0.2 to 234 HV0.2 (20.6% improvement). Residual tensile stress on the specimen surface was offset and replaced by residual compressive stress after LSP. Concurrently, the high-cycle fatigue limit of the specimens was significantly improved, with the most pronounced improvement observed in specimens subjected to 5 J energy—increasing from 258 MPa to 295 MPa, representing an increase of 14.34%.

Schlagwörter

Stichwörter der Autor:innen

fatigue limithigh-cycle fatiguehigh-strength steellaser shock peening (LSP)microhardnessresidual stresswelded joint

Autor:innen und Institutionen

  • School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510640, China.
  • National Engineering Research Center of Near-Net-Shape Forming for Metallic Materials, Guangzhou 510640, China.
  • Guangzhou Shipyard International Corporation Limited, Guangzhou 511462, China.

ORCID-Profile: Shengguan Qu, Xiaoqiang Li

Förderung

  • 2024 Special Project on Marine Economic Development of Guangdong Province

Zitieren

APA

Qu, S., Sha, Y., Hou, Y., Wang, J., Li, F., & Li, X. (2025). Effect of Laser Shock Peening on High-Cycle Fatigue Performance and Residual Stress in DH36 Welded Joints. Materials, 18(22), 5178. https://doi.org/10.3390/ma18225178

Vancouver

Qu S, Sha Y, Hou Y, Wang J, Li F, Li X. Effect of Laser Shock Peening on High-Cycle Fatigue Performance and Residual Stress in DH36 Welded Joints. Materials. 2025;18(22):5178. doi:10.3390/ma18225178

BibTeX
@article{Qu2025,
  author = {Qu, Shengguan and Sha, Yulian and Hou, Yi and Wang, Jianhua and Li, Fenglei and Li, Xiaoqiang},
  title = {Effect of Laser Shock Peening on High-Cycle Fatigue Performance and Residual Stress in DH36 Welded Joints},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {22},
  pages = {5178},
  doi = {10.3390/ma18225178}
}
Kostenlos starten →