EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Directional Auxetic Behavior of Mechanical Metamaterials: Material-Dependent and Geometry-Driven Mechanisms

Barbara Schürger iD, Jozef Bocko iD, Peter Frankovský iD, Ingrid Delyová iD, Ján Kostka iD

Materials · 10.11.2025 · 18 (22) · 5103

DOI: 10.3390/ma18225103 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 10.11.2025. Verfasst von Barbara Schürger und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Applied Mechanics and Mechanical Engineering, Faculty of Mechanical Engineering, Technical University of Košice, Letná 1/9, 042 00 Koši…. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Mechanical metamaterials derive their unconventional properties from geometry rather than composition, enabling phenomena such as negative Poisson’s ratio and tunable stiffness. This study presents a systematic finite element analysis of three canonical auxetic topologies—re-entrant, chiral, and anti-chiral lattices—subjected to uniaxial loading in two orthogonal directions. Four engineering metals (steel, copper, aluminum, titanium) were analyzed to evaluate how material stiffness interacts with geometry in defining auxetic response. A detailed mesh-convergence and sensitivity analysis ensured numerical reliability and isolation of geometric effects within the linear-elastic regime. The results reveal three distinct mechanisms: (i) material-sensitive auxeticity in re-entrant lattices, which achieved the most extreme negative Poisson’s ratios (ν < −2.0) but with strong dependence on stiffness; (ii) directional auxeticity in chiral lattices, which exhibited negligible response under X-loading but significant negative values (ν ≈ −0.5) under Z-loading; and (iii) geometry-dominated auxeticity in anti-chiral lattices, which remained robust and nearly material-independent (ν ≈ −1.2). This comparative framework clarifies the balance between geometry- and material-driven mechanisms, extending prior single-material or single-geometry studies. The findings provide design guidelines for selecting auxetic topologies depending on whether robustness, tunability, or maximum auxetic effect is required, with direct implications for protective equipment, aerospace structures, and biomedical scaffolds.

Schlagwörter

Stichwörter der Autor:innen

anisotropy in mechanical behaviorauxetic metamaterialschiral and anti-chiral structuresfinite element analysis (FEA)material–geometry interactionnegative Poisson’s ratiore-entrant latticesstructural design applications

Autor:innen und Institutionen

  • Department of Applied Mechanics and Mechanical Engineering, Faculty of Mechanical Engineering, Technical University of Košice, Letná 1/9, 042 00 Košice, Slovakia.

ORCID-Profile: Barbara Schürger, Jozef Bocko, Peter Frankovský, Ingrid Delyová, Ján Kostka

Zitieren

APA

Schürger, B., Bocko, J., Frankovský, P., Delyová, I., & Kostka, J. (2025). Directional Auxetic Behavior of Mechanical Metamaterials: Material-Dependent and Geometry-Driven Mechanisms. Materials, 18(22), 5103. https://doi.org/10.3390/ma18225103

Vancouver

Schürger B, Bocko J, Frankovský P, Delyová I, Kostka J. Directional Auxetic Behavior of Mechanical Metamaterials: Material-Dependent and Geometry-Driven Mechanisms. Materials. 2025;18(22):5103. doi:10.3390/ma18225103

BibTeX
@article{Schrger2025,
  author = {Schürger, Barbara and Bocko, Jozef and Frankovský, Peter and Delyová, Ingrid and Kostka, Ján},
  title = {Directional Auxetic Behavior of Mechanical Metamaterials: Material-Dependent and Geometry-Driven Mechanisms},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {22},
  pages = {5103},
  doi = {10.3390/ma18225103}
}
Kostenlos starten →