EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Prediction of Compressive Strength of Concrete Using Explainable Machine Learning Models

Hainan Fu, Xiong Zhou, Pengfei Xu, Dandan Sun

Materials · 03.11.2025 · 18 (21) · 5009

DOI: 10.3390/ma18215009 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 03.11.2025. Verfasst von Hainan Fu und 3 weiteren Autor:innen. Beteiligte Einrichtung: Shield and Underground Engineering Research Institute, China Railway 15th Bureau Group Co., Ltd., Shanghai 200070, China. Die Arbeit wurde bisher 31-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key R & D Program of China, Shanghai Municipal Science and Technology Commission, National Key R&D Program of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Predicting the compressive strength of concrete is essential for engineering design and quality assurance. Traditional empirical formulas often fall short in capturing complex multi-factor interactions and nonlinear relationships. This study employs an interpretable machine learning framework using Gradient Boosting Trees, Random Forest, and Backpropagation Neural Networks to predict concrete compressive strength. Bayesian optimization was employed for hyperparameter tuning, and SHAP analysis was used to quantify feature contributions. Based on 223 sets of compression test data, this study systematically compared the predictive performance of the five models. Results demonstrate that the CatBoost model achieved the best results, R2 of 0.9388, RMSE of 2.7131 MPa, and MAPE of 5.45%, outperforming other models. SHAP analysis indicated that cement content had the greatest impact on strength, followed by water content, water reducer, fly ash, and aggregates, with notable interactive effects between factors. Compared to the empirical formula in the current industry standard Specification for Mix Proportion Design of Ordinary Concrete, the CatBoost model showed higher accuracy under specific raw material and curing conditions, with MAPE values of 2.94% and 5.96%, respectively. The optimized CatBoost model, combined with interpretability analysis, offers a data-driven tool for concrete mix optimization, balancing high precision with practical engineering applicability.

Schlagwörter

Stichwörter der Autor:innen

Bayesian optimizationSHAP analysisconcrete compressive strengthmachine learningmix proportion optimization

Autor:innen und Institutionen

  • Shield and Underground Engineering Research Institute, China Railway 15th Bureau Group Co., Ltd., Shanghai 200070, China.
  • School of Engineering and Technology, China University of Geosciences, Beijing 100083, China.

Förderung

  • National Key R & D Program of China
  • Shanghai Municipal Science and Technology Commission
  • National Key R&D Program of China
  • Shanghai Science and Technology Commission Qimingxing Project

Zitieren

APA

Fu, H., Zhou, X., Xu, P., & Sun, D. (2025). Prediction of Compressive Strength of Concrete Using Explainable Machine Learning Models. Materials, 18(21), 5009. https://doi.org/10.3390/ma18215009

Vancouver

Fu H, Zhou X, Xu P, Sun D. Prediction of Compressive Strength of Concrete Using Explainable Machine Learning Models. Materials. 2025;18(21):5009. doi:10.3390/ma18215009

BibTeX
@article{Fu2025,
  author = {Fu, Hainan and Zhou, Xiong and Xu, Pengfei and Sun, Dandan},
  title = {Prediction of Compressive Strength of Concrete Using Explainable Machine Learning Models},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {21},
  pages = {5009},
  doi = {10.3390/ma18215009}
}
Kostenlos starten →