EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Wear Resistance Enhancement of Rotary Tillage Blades Through Structural Optimization and Surface Strengthening

Zechang Zou iD, Jiacheng Li, Xingwang Wang, Cuiyong Tang iD, Xueyong Chen iD

Materials · 02.11.2025 · 18 (21) · 5006

DOI: 10.3390/ma18215006 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 02.11.2025. Verfasst von Zechang Zou und 4 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical and Electrical Engineering, Fujian Agriculture and Forestry University, Fuzhou 350002, China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fujian Provincial Department of Science and Technology, key research and industrialization projects of science and technology innovation in Fujian Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Rotary tillage blades, as critical components of soil tillage machinery, encounter significant challenges in mountainous agricultural operations, where excessive wear and high energy consumption are persistent issues. To address these problems, this study proposes an integrated strategy combining structural optimization with surface reinforcement. A blade–soil interaction model based on Smoothed Particle Hydrodynamics (SPH) was developed to optimize blade geometry, reducing power consumption to 0.106 kW with a simulation error of only 2.83%. In parallel, Fe60–WC composite coatings containing 30%, 35%, and 40% WC were fabricated on 65Mn substrates using laser cladding. Microstructural analysis revealed significant grain refinement with increasing WC content, while tribological tests showed that the 35% WC coating blades exhibited superior wear resistance, with a mass loss of 1.9 mg, and a relatively low friction coefficient of 0.362. Field trials further confirmed that the blades resulted in a 45.75% reduction in average wear, after structural enhancement and the application of the optimized coating, with a measured loss of 2.259 g compared to the uncoated blades. These findings demonstrate the synergistic benefits of structural optimization and advanced surface engineering, providing an effective pathway to improve the durability and efficiency of rotary tillage blades in demanding field conditions.

Schlagwörter

Stichwörter der Autor:innen

SPH simulationenergy efficiencylaser claddingrotary tillage bladestructural optimizationwear resistance

Autor:innen und Institutionen

  • College of Mechanical and Electrical Engineering, Fujian Agriculture and Forestry University, Fuzhou 350002, China.
  • School of Mechanical and Intelligent Manufacturing, Fujian Chuanzheng Communications College, Fuzhou 350007, China.

ORCID-Profile: Zechang Zou, Cuiyong Tang, Xueyong Chen

Förderung

  • Fujian Provincial Department of Science and Technology
  • key research and industrialization projects of science and technology innovation in Fujian Province

Zitieren

APA

Zou, Z., Li, J., Wang, X., Tang, C., & Chen, X. (2025). Wear Resistance Enhancement of Rotary Tillage Blades Through Structural Optimization and Surface Strengthening. Materials, 18(21), 5006. https://doi.org/10.3390/ma18215006

Vancouver

Zou Z, Li J, Wang X, Tang C, Chen X. Wear Resistance Enhancement of Rotary Tillage Blades Through Structural Optimization and Surface Strengthening. Materials. 2025;18(21):5006. doi:10.3390/ma18215006

BibTeX
@article{Zou2025,
  author = {Zou, Zechang and Li, Jiacheng and Wang, Xingwang and Tang, Cuiyong and Chen, Xueyong},
  title = {Wear Resistance Enhancement of Rotary Tillage Blades Through Structural Optimization and Surface Strengthening},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {21},
  pages = {5006},
  doi = {10.3390/ma18215006}
}
Kostenlos starten →