Ytterbium-Modified Rapidly Solidified Mg-Zn-Ca Alloys: Improvements in Strength and Corrosion Resistance for Biodegradable Implant Applications
Materials · 30.10.2025 · 18 (21) · 4959
DOI: 10.3390/ma18214959 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 30.10.2025. Verfasst von Zuzana Molčanová und 5 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Materials Research of Slovak Academy of Sciences, Watsonova 47, 040 01 Košice, Slovakia. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: VEGA Slovakia, Slovak Research and Development Agency, VEGA project.
Abstract (Originalsprache)
Biodegradable alloys are increasingly studied in medical research to find the best balance between mechanical performance and biocompatibility. Magnesium (Mg) alloys are particularly attractive because of their low density, good mechanical properties, and compatibility with the human body. However, rapid corrosion limits their wider use. Recently, Mg alloys containing zinc (Zn) and calcium (Ca) have drawn interest due to more suitable degradation rates. In this study, Mg66Zn30Ca4 was chosen as the base alloy due to its high mechanical strength, excellent biocompatibility, and favorable corrosion behavior, making it an ideal starting point for biodegradable implants. We investigated how adding ytterbium (Yb) affects the mechanical and corrosion behavior of this base alloy. Mg66−xZn30Ca4Ybx (x = 2, 4, 6) rods were produced using rapid solidification, and their mechanical and electrochemical properties were systematically evaluated. The results show that adding Yb significantly improves corrosion resistance while maintaining high mechanical strength, making these materials promising for applications requiring both strength and controlled degradation. Corrosion tests indicated that the surface of the samples developed an oxygen-rich layer approximately 18 μm thick, as identified by EDS mapping. Overall, Yb modification enhances the suitability of Mg-Zn-Ca alloys for biodegradable orthopedic implants.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Materials Research of Slovak Academy of Sciences, Watsonova 47, 040 01 Košice, Slovakia.
- Institute of Materials, Faculty of Materials, Metallurgy and Recycling, Technical University of Košice, Letná 1/9, 042 00 Košice, Slovakia.
- Department of Materials Physics, Eötvös Loránd University, Pázmány Péter Sétany 1/a, 1117 Budapest, Hungary.
ORCID-Profile: Zuzana Molčanová, Beáta Ballóková, Karel Saksl, Dóra Zalka, Zoltán Dankházi
Förderung
- VEGA Slovakia
- Slovak Research and Development Agency
- VEGA project
Zitieren
APA
Molčanová, Z., Ballóková, B., Saksl, K., Džupon, M., Zalka, D., & Dankházi, Z. (2025). Ytterbium-Modified Rapidly Solidified Mg-Zn-Ca Alloys: Improvements in Strength and Corrosion Resistance for Biodegradable Implant Applications. Materials, 18(21), 4959. https://doi.org/10.3390/ma18214959
Vancouver
Molčanová Z, Ballóková B, Saksl K, Džupon M, Zalka D, Dankházi Z. Ytterbium-Modified Rapidly Solidified Mg-Zn-Ca Alloys: Improvements in Strength and Corrosion Resistance for Biodegradable Implant Applications. Materials. 2025;18(21):4959. doi:10.3390/ma18214959
BibTeX
@article{Molanov2025,
author = {Molčanová, Zuzana and Ballóková, Beáta and Saksl, Karel and Džupon, Miroslav and Zalka, Dóra and Dankházi, Zoltán},
title = {Ytterbium-Modified Rapidly Solidified Mg-Zn-Ca Alloys: Improvements in Strength and Corrosion Resistance for Biodegradable Implant Applications},
journal = {Materials},
year = {2025},
volume = {18},
number = {21},
pages = {4959},
doi = {10.3390/ma18214959}
}
EUVIMED