Design and Comparative Numerical Analysis of AlSi10Mg PBF-LB/M Manufactured TPMS Lattice Structures for Improved Mechanical Performance
Materials · 28.10.2025 · 18 (21) · 4934
DOI: 10.3390/ma18214934 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 28.10.2025. Verfasst von Laura Luran Sun und 6 weiteren Autor:innen. Beteiligte Einrichtung: Product Development and Machine Elements, Technical University of Darmstadt, 64287 Darmstadt, Germany. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Additive manufacturing enables the fabrication of lightweight structures with complex geometries, offering significant potential in aerospace and biomedical applications. Triply periodic minimal surface (TPMS) lattice structures are of particular interest due to their geometry. However, their intricate geometries pose challenges for both experimental characterization and numerical simulation. This study numerically investigates the effective mechanical properties and dynamic response of AlSi10Mg TPMS structures produced by laser powder bed fusion (PBF-LB/M). Using a micro–mesoscale approach with periodic boundary conditions, Young’s modulus, shear modulus, and Poisson’s ratio in the elastic region using the Johnson–Cook plasticity model are analyzed. Finite element simulations of the representative volume element (RVE) are employed to assess energy absorption and damage evolution under high strain rates, incorporating a ductile damage model. The performance of sheet-based TPMS lattices, namely, Schwarz–Primitive, Gyroid, Schwarz–Diamond, and IWP, is compared with strut-based lattices, namely, BCC and FCC, across volume fractions of 20–40%. Results demonstrate the superior stiffness and energy absorption of TPMS lattices, where Schwarz–Diamond and IWP outperformed the other structures, highlighting their advantages over conventional strut-based designs. This comprehensive numerical framework provides new insights into the high strain-rate behavior of TPMS structures and supports their design for demanding engineering applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Product Development and Machine Elements, Technical University of Darmstadt, 64287 Darmstadt, Germany.
- Lightweight Engineering and Structural Mechanics, Technical University of Darmstadt, 64287 Darmstadt, Germany.
ORCID-Profile: Laura Luran Sun, Nikola Milenkovski, Kartikay Awasthi, Xuan Bach Nghiem, Nicola Mongelli, Eckhard Kirchner
Zitieren
APA
Sun, L. L., Milenkovski, N., Awasthi, K., Nghiem, X. B., Mongelli, N., Kirchner, E., & Mittelstedt, C. (2025). Design and Comparative Numerical Analysis of AlSi10Mg PBF-LB/M Manufactured TPMS Lattice Structures for Improved Mechanical Performance. Materials, 18(21), 4934. https://doi.org/10.3390/ma18214934
Vancouver
Sun LL, Milenkovski N, Awasthi K, Nghiem XB, Mongelli N, Kirchner E, et al. Design and Comparative Numerical Analysis of AlSi10Mg PBF-LB/M Manufactured TPMS Lattice Structures for Improved Mechanical Performance. Materials. 2025;18(21):4934. doi:10.3390/ma18214934
BibTeX
@article{Sun2025,
author = {Sun, Laura Luran and Milenkovski, Nikola and Awasthi, Kartikay and Nghiem, Xuan Bach and Mongelli, Nicola and Kirchner, Eckhard and Mittelstedt, Christian},
title = {Design and Comparative Numerical Analysis of AlSi10Mg PBF-LB/M Manufactured TPMS Lattice Structures for Improved Mechanical Performance},
journal = {Materials},
year = {2025},
volume = {18},
number = {21},
pages = {4934},
doi = {10.3390/ma18214934}
}
EUVIMED