Multi-Objective Optimization Design of Hybrid Fiber-Reinforced ECC Based on Box–Behnken and NSGA-II
Materials · 27.10.2025 · 18 (21) · 4914
DOI: 10.3390/ma18214914 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 27.10.2025. Verfasst von Xiao Wang und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, North China University of Water Resources and Electric Power, Zhengzhou 450045, China. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Henan Province Key Research and Development Program, Henan Provincial Transportation Science and Technology Project.
Abstract (Originalsprache)
To enhance the effectiveness and precision of design and to produce more low-carbon and high-performance Engineered Cementitious Composites (ECCs), novel hybrid fiber-reinforced high-ductility cementitious composites developed by incorporating a combination of ultra-high-molecular-weight polyethylene fibers (UHMWPE) and basalt fibers (BFs) into the cementitious matrix. Building upon the Box–Behnken design model from Response Surface Methodology (RSM), this study investigates the effects of different water-to-binder ratios and fiber contents on the mechanical properties of hybrid fiber-reinforced ECC. Analysis of variance (ANOVA) was used to validate the regression models. Furthermore, multi-objective optimization of the ECC mix proportion was achieved by employing the NSGA-II algorithm in conjunction with the TOPSIS comprehensive evaluation method. The results indicate that UHMWPE and BFs exhibited a significant positive hybrid effect. The order of factor significance was as follows: The content of ultra-high-molecular-weight polyethylene is greater than that of basalt fiber, and the content of basalt fiber is greater than that of the water–binder ratio. The results of variance analysis show that the regression model has high fitting accuracy. Furthermore, the algorithmic optimization yielded an optimal mix proportion: a water-to-binder ratio of 0.21, UHMWPE fiber content of 1.51%, and BF content of 0.85%. This study provides a valuable reference for the multi-objective optimization design of ECC mix proportions targeting diverse strength and toughness requirements.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science and Engineering, North China University of Water Resources and Electric Power, Zhengzhou 450045, China.
- Research and Development Center of Transport Industry of Application Technology of High Performance Green Materials, Henan Jiaoyuan Engineering Technology Group Co., Ltd., Zhengzhou 451450, China.
- School of Architectural and Civil Engineering, Zhongyuan University of Technology, Zhengzhou 450007, China.
ORCID-Profile: Fei Yang
Förderung
- Henan Province Key Research and Development Program
- Henan Provincial Transportation Science and Technology Project
Zitieren
APA
Wang, X., Jing, H., Chen, H., Zheng, S., Yang, F., & Shao, J. (2025). Multi-Objective Optimization Design of Hybrid Fiber-Reinforced ECC Based on Box–Behnken and NSGA-II. Materials, 18(21), 4914. https://doi.org/10.3390/ma18214914
Vancouver
Wang X, Jing H, Chen H, Zheng S, Yang F, Shao J. Multi-Objective Optimization Design of Hybrid Fiber-Reinforced ECC Based on Box–Behnken and NSGA-II. Materials. 2025;18(21):4914. doi:10.3390/ma18214914
BibTeX
@article{Wang2025,
author = {Wang, Xiao and Jing, Haowen and Chen, Hongkui and Zheng, Sen and Yang, Fei and Shao, Jinggan},
title = {Multi-Objective Optimization Design of Hybrid Fiber-Reinforced ECC Based on Box–Behnken and NSGA-II},
journal = {Materials},
year = {2025},
volume = {18},
number = {21},
pages = {4914},
doi = {10.3390/ma18214914}
}
EUVIMED