EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Green Grouting Material Based on Phosphogypsum–Slag Geopolymer: Feasibility and Performance Evaluation for Trenchless Road Repair

Xiaoping Ji iD, Liyuan Dong, Xiaojuan Li, Honglei Lu, Houfu Song, Penghui Wen

Materials · 26.10.2025 · 18 (21) · 4901

DOI: 10.3390/ma18214901 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 26.10.2025. Verfasst von Xiaoping Ji und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Highway, Chang'an University, Xi'an 710064, China. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Xiaoping Ji, Xiaojuan Li, Penghui Wen.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Grouting materials are essential for trenchless road repair. However, conventional cement-based grouting materials suffer from considerable shrinkage and low early-age strength. To address these challenges, this study utilizes industrial solid wastes (phosphogypsum and slag) for the synergistic synthesis of a phosphogypsum–slag-based geopolymer (PBG). Using PBG as a binder and fine sand as an aggregate, a sustainable grouting material was developed. The influence of binder-to-sand and water-to-solid ratios on PBG workability was systematically evaluated, identifying the optimal water-to-solid ratio. Based on this, the effects of the binder-to-sand ratio on mechanical strength at various curing ages, durability, and leaching of toxic substances were analyzed. The mechanism of strength development mechanism and immobilization behavior of toxic substances were revealed through SEM. The results indicate that the material exhibits excellent performance when the water-to-solid ratio is 0.28 and the binder-to-sand ratio ranges from 0.70 to 0.75. The material exhibits fluidity of 160–240 mm, initial setting time > 30 min, and final setting time < 400 min, a bleeding rate < 0.4%, and 28-day compressive strength ≥ 9.0 MPa. Both the impermeability and freeze–thaw resistance of PBG grouting material improve with a higher binder-to-sand ratio. Toxic substance leaching complies with Class III groundwater quality standards. Carbon footprint analysis indicates that the material significantly reduces carbon emissions.

Schlagwörter

Stichwörter der Autor:innen

durabilitygrouting materialmechanical strengthphosphogypsumslagtoxic substancesworkability

Autor:innen und Institutionen

  • School of Highway, Chang'an University, Xi'an 710064, China.
  • Technology Development Group Co., Ltd., Shaanxi Transportation Holding Group, Xi'an 710075, China.
  • Department of Automotive Engineering, Guizhou Aerospace Vocational and Technical College, Xinpu Campus, Zunyi 563000, China.

ORCID-Profile: Xiaoping Ji

Förderung

  • Xiaoping Ji
  • Xiaojuan Li
  • Penghui Wen
  • National Natural Science Foundation of China
  • Key R&D Plan of Shaanxi Province
  • Xi’an Science and Technology Program Project
  • Transportation Technology Project of Shaanxi Province

Zitieren

APA

Ji, X., Dong, L., Li, X., Lu, H., Song, H., & Wen, P. (2025). Green Grouting Material Based on Phosphogypsum–Slag Geopolymer: Feasibility and Performance Evaluation for Trenchless Road Repair. Materials, 18(21), 4901. https://doi.org/10.3390/ma18214901

Vancouver

Ji X, Dong L, Li X, Lu H, Song H, Wen P. Green Grouting Material Based on Phosphogypsum–Slag Geopolymer: Feasibility and Performance Evaluation for Trenchless Road Repair. Materials. 2025;18(21):4901. doi:10.3390/ma18214901

BibTeX
@article{Ji2025,
  author = {Ji, Xiaoping and Dong, Liyuan and Li, Xiaojuan and Lu, Honglei and Song, Houfu and Wen, Penghui},
  title = {Green Grouting Material Based on Phosphogypsum–Slag Geopolymer: Feasibility and Performance Evaluation for Trenchless Road Repair},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {21},
  pages = {4901},
  doi = {10.3390/ma18214901}
}
Kostenlos starten →