EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of SiO2 and MoS2 Particles as Lubricant Additives on Lubrication Performance in Sheet Metal Forming

Krzysztof Szwajka iD, Tomasz Trzepieciński iD, Marek Szewczyk, Joanna Zielińska-Szwajka iD

Materials · 04.10.2025 · 18 (19) · 4605

DOI: 10.3390/ma18194605 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 04.10.2025. Verfasst von Krzysztof Szwajka und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Integrated Design and Tribology Systems, Faculty of Mechanics and Technology, Rzeszów University of Technology, ul. Kwiatkowskiego 4, 3…. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Modifying lubricants with hard material particles improves lubricant performance by allowing the particles to penetrate the contact area and separate the contacting surfaces. The use of solid particles as additives in fluid lubricants presents a promising avenue for providing effective lubrication under high loads in sheet metal forming. This article presents the results of friction tests using the bending under tension friction tribotester. Low-carbon DC01 steel sheets were used as the test material. The main goal of the study was to determine the effect of lubricant modification by adding MoS2 and SiO2 particles and the modification of 145Cr6 steel countersamples on the coefficient of friction (CoF), changes in friction-induced surface roughness and friction mechanisms. The surfaces of the countersamples were modified using electron beam melting and the ion implantation of lead (IPb). It was found that increasing the SiO2 and MoS2 content in DC01/145Cr6 and DC01/IPb contacts under base oil lubrication conditions resulted in a decrease in the CoF value. For the countersample subjected to electron beam melting, considering all friction conditions, the CoF decreased between 31.9% and 37.5%.

Schlagwörter

Stichwörter der Autor:innen

electron beam meltingfrictionion implantationmechanical propertiesmetal formingsteel sheets

Autor:innen und Institutionen

  • Department of Integrated Design and Tribology Systems, Faculty of Mechanics and Technology, Rzeszów University of Technology, ul. Kwiatkowskiego 4, 37-450 Stalowa Wola, Poland.
  • Department of Manufacturing Processes and Production Engineering, Faculty of Mechanical Engineering and Aeronautics, Rzeszów University of Technology, al. Powstańców Warszawy 8, 35-959 Rzeszów, Poland.
  • Department of Component Manufacturing and Production Organization, Faculty of Mechanics and Technology, Rzeszów University of Technology, ul. Kwiatkowskiego 4, 37-450 Stalowa Wola, Poland.

ORCID-Profile: Krzysztof Szwajka, Tomasz Trzepieciński, Joanna Zielińska-Szwajka

Zitieren

APA

Szwajka, K., Trzepieciński, T., Szewczyk, M., & Zielińska-Szwajka, J. (2025). Effect of SiO2 and MoS2 Particles as Lubricant Additives on Lubrication Performance in Sheet Metal Forming. Materials, 18(19), 4605. https://doi.org/10.3390/ma18194605

Vancouver

Szwajka K, Trzepieciński T, Szewczyk M, Zielińska-Szwajka J. Effect of SiO2 and MoS2 Particles as Lubricant Additives on Lubrication Performance in Sheet Metal Forming. Materials. 2025;18(19):4605. doi:10.3390/ma18194605

BibTeX
@article{Szwajka2025,
  author = {Szwajka, Krzysztof and Trzepieciński, Tomasz and Szewczyk, Marek and Zielińska-Szwajka, Joanna},
  title = {Effect of SiO2 and MoS2 Particles as Lubricant Additives on Lubrication Performance in Sheet Metal Forming},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {19},
  pages = {4605},
  doi = {10.3390/ma18194605}
}
Kostenlos starten →