EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thermo-Mechanical Approach to Material Extrusion Process During Fused Filament Fabrication of Polymeric Samples

Mahmoud M Farh iD, Viktor Gribniak iD

Materials · 29.09.2025 · 18 (19) · 4537

DOI: 10.3390/ma18194537 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 29.09.2025. Verfasst von Mahmoud M Farh und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Steel and Composite Structures, Vilnius Gediminas Technical University (VILNIUS TECH), Saulėtekio Av. 11, 10223 Vilnius, Lithuania. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The Economic Revitalization and Resilience Enhancement "New Generation Lithuania" Plan, Economic Revitalization and Resilience Enhancement “New Generation Lithuania” Plan.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

While material extrusion via fused filament fabrication (FFF) offers design flexibility and rapid prototyping, its practical use in engineering is limited by mechanical challenges, including residual stresses, geometric distortions, and potential interlayer debonding. These issues arise from the dynamic thermal profiles during FFF, including temperature gradients, non-uniform hardening, and rapid thermal cycling, which lead to uneven internal stress development depending on fabrication parameters and object topology. These problems can compromise the structural integrity and mechanical properties of FFF parts, especially when the load-bearing capacity and geometric accuracy are critical. This study focuses on polylactic acid (PLA) due to its widespread application in engineering. It introduces a computational framework for coupled thermo-mechanical simulations of the FFF process using ABAQUS (Version 2020) finite element software. A key innovation is an automated subroutine that converts G-code into a time-resolved event series for finite element activation. The simulation framework explicitly models the sequential stages of printing, cooling, and detachment, enabling prediction of adhesive loss and post-process warpage. A transient thermal model evaluates the temperature distribution during FFF, providing boundary conditions for a mechanical simulation that predicts residual stresses and warping. Uniquely, the proposed model incorporates the detachment stage, enabling a more realistic and experimentally validated prediction of warpage and residual stress release in FFF-fabricated components. Although the average deviation between predicted and measured displacements is about 10.6%, the simulation adequately reflects the spatial distribution and magnitude of warpage, confirming its practical usefulness for process optimization and design validation.

Schlagwörter

Stichwörter der Autor:innen

finite element modelingfused filament fabrication (FFF)polylactic acid (PLA)prototypingresidual stressesthermo-mechanical analysiswarpage

Autor:innen und Institutionen

  • Department of Steel and Composite Structures, Vilnius Gediminas Technical University (VILNIUS TECH), Saulėtekio Av. 11, 10223 Vilnius, Lithuania.
  • Laboratory of Innovative Building Structures, Vilnius Gediminas Technical University (VILNIUS TECH), Saulėtekio Av. 11, 10223 Vilnius, Lithuania.

ORCID-Profile: Mahmoud M Farh, Viktor Gribniak

Förderung

  • The Economic Revitalization and Resilience Enhancement "New Generation Lithuania" Plan
  • Economic Revitalization and Resilience Enhancement “New Generation Lithuania” Plan

Zitieren

APA

Farh, M. M., & Gribniak, V. (2025). Thermo-Mechanical Approach to Material Extrusion Process During Fused Filament Fabrication of Polymeric Samples. Materials, 18(19), 4537. https://doi.org/10.3390/ma18194537

Vancouver

Farh MM, Gribniak V. Thermo-Mechanical Approach to Material Extrusion Process During Fused Filament Fabrication of Polymeric Samples. Materials. 2025;18(19):4537. doi:10.3390/ma18194537

BibTeX
@article{Farh2025,
  author = {Farh, Mahmoud M and Gribniak, Viktor},
  title = {Thermo-Mechanical Approach to Material Extrusion Process During Fused Filament Fabrication of Polymeric Samples},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {19},
  pages = {4537},
  doi = {10.3390/ma18194537}
}
Kostenlos starten →