EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Recycled Components in 3D Concrete Printing Mixes: A Review

Marcin Maroszek iD, Magdalena Rudziewicz iD, Marek Hebda iD

Materials · 28.09.2025 · 18 (19) · 4517

DOI: 10.3390/ma18194517 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 28.09.2025. Verfasst von Marcin Maroszek und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Engineering, Faculty of Materials Engineering and Physics, Cracow University of Technology, Warszawska 24, 31-155 Kraków, Pol…. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 212 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Rapid population growth and accelerating urbanization are intensifying the demand for construction materials, particularly concrete, which is predominantly produced with Portland cement and natural aggregates. This reliance imposes substantial environmental burdens through resource depletion and greenhouse gas emissions. Within the framework of sustainable construction, recycled aggregates and industrial by-products such as fly ash, slags, crushed glass, and other secondary raw materials have emerged as viable substitutes in concrete production. At the same time, three-dimensional concrete printing (3DCP) offers opportunities to optimize material use and minimize waste, yet it requires tailored mix designs with controlled rheological and mechanical performance. This review synthesizes current knowledge on the use of recycled construction and demolition waste, industrial by-products, and geopolymers in concrete mixtures for 3D printing applications. Particular attention is given to pozzolanic activity, particle size effects, mechanical strength, rheology, thermal conductivity, and fire resistance of recycled-based composites. The environmental assessment is considered through life-cycle analysis (LCA), emphasizing carbon footprint reduction strategies enabled by recycled constituents and low-clinker formulations. The analysis demonstrates that recycled-based 3D printable concretes can maintain or enhance structural performance while mix-level (cradle-to-gate, A1–A3) LCAs of printable mixes report CO2 reductions typically in the range of ~20–50% depending on clinker substitution and recycled constituents—with up to ~48% for fine recycled aggregates when accompanied by cement reduction and up to ~62% for mixes with recycled concrete powder, subject to preserved printability. This work highlights both opportunities and challenges, outlining pathways for advancing durable, energy-efficient, and environmentally responsible 3D-printed construction materials.

Schlagwörter

Stichwörter der Autor:innen

3D concrete printing (3DCP)carbon footprintcircular economylife cycle assessment (LCA)recycled construction materialssupplementary cementitious materials (SCM)sustainable construction

Autor:innen und Institutionen

  • Department of Materials Engineering, Faculty of Materials Engineering and Physics, Cracow University of Technology, Warszawska 24, 31-155 Kraków, Poland.

ORCID-Profile: Marcin Maroszek, Magdalena Rudziewicz, Marek Hebda

Förderung

  • Ministry of Science and Higher Education

Zitieren

APA

Maroszek, M., Rudziewicz, M., & Hebda, M. (2025). Recycled Components in 3D Concrete Printing Mixes: A Review. Materials, 18(19), 4517. https://doi.org/10.3390/ma18194517

Vancouver

Maroszek M, Rudziewicz M, Hebda M. Recycled Components in 3D Concrete Printing Mixes: A Review. Materials. 2025;18(19):4517. doi:10.3390/ma18194517

BibTeX
@article{Maroszek2025,
  author = {Maroszek, Marcin and Rudziewicz, Magdalena and Hebda, Marek},
  title = {Recycled Components in 3D Concrete Printing Mixes: A Review},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {19},
  pages = {4517},
  doi = {10.3390/ma18194517}
}
Kostenlos starten →