EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Tailoring Strength and Corrosion Resistance in Al–Zn–Mg–Cu Alloys by Total (Zn + Mg) Content and Multi-Directional Forging Process

Junfu Lin, Tangjian Liu, Mingdong Wu iD, Shuo Yuan, Zeyu Li, Yang Huang, Xiao Yin, Lanping Huang, Wensheng Liu, Daihong Xiao iD

Materials · 25.09.2025 · 18 (19) · 4476

DOI: 10.3390/ma18194476 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 25.09.2025. Verfasst von Junfu Lin und 9 weiteren Autor:innen. Beteiligte Einrichtung: National Key Laboratory of Science and Technology on High-Strength Structural Materials, Central South University, Changsha 410083, China. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The effects of (Zn + Mg) total content (9.6–11.7 wt.%) combined with multi-directional forging (MDF) on the microstructure and properties of high-strength Al–Zn–Mg–Cu alloys were systematically investigated. Our results demonstrate that the alloy obtains significant grain refinement, which is attributed to the dynamic recrystallization in the MDF process. Specifically, Al-8.6Zn-1.55Mg-1.9Cu-0.11Zr (Zn + Mg = 10.15 wt.%) obtains the maximum recrystallization ratio (51.8%) and the weakest texture strength, and also forms the mortise and tenon nested grain structure. Increasing the total (Zn + Mg) content can achieve significant performance enhancement, which is attributed to the refinement of the η′ phase; however, a higher total (Zn + Mg) content will lead to the continuous distribution of coarse η-MgZn2 phases formed along the grain boundary, accompanied by the broadening of precipitate-free precipitation zones (PFZs). Compared with other alloys, Al-8.6Zn-1.55Mg-1.9Cu-0.11Zr (Zn + Mg = 10.15 wt.%) maintains high strength while ensuring desirable plasticity due to its mortise and tenon nested grain structure. In addition, its desirable grain boundary precipitation behavior makes it exhibit the best corrosion resistance. These findings indicate that maintaining the total (Zn + Mg) content around 10 wt.% achieves a balance between strength and corrosion resistance, offering a theoretical foundation for the design of high-strength and corrosion-resistant Al–Zn–Mg–Cu alloys.

Schlagwörter

Stichwörter der Autor:innen

Al–Zn–Mg–Cu alloyscorrosion resistancemechanical propertiesmicrostructuremortise and tenon nested grain structure

Autor:innen und Institutionen

  • National Key Laboratory of Science and Technology on High-Strength Structural Materials, Central South University, Changsha 410083, China.

ORCID-Profile: Mingdong Wu, Daihong Xiao

Zitieren

APA

Lin, J., Liu, T., Wu, M., Yuan, S., Li, Z., Huang, Y., Yin, X., Huang, L., Liu, W., & Xiao, D. (2025). Tailoring Strength and Corrosion Resistance in Al–Zn–Mg–Cu Alloys by Total (Zn + Mg) Content and Multi-Directional Forging Process. Materials, 18(19), 4476. https://doi.org/10.3390/ma18194476

Vancouver

Lin J, Liu T, Wu M, Yuan S, Li Z, Huang Y, et al. Tailoring Strength and Corrosion Resistance in Al–Zn–Mg–Cu Alloys by Total (Zn + Mg) Content and Multi-Directional Forging Process. Materials. 2025;18(19):4476. doi:10.3390/ma18194476

BibTeX
@article{Lin2025,
  author = {Lin, Junfu and Liu, Tangjian and Wu, Mingdong and Yuan, Shuo and Li, Zeyu and Huang, Yang and Yin, Xiao and Huang, Lanping and Liu, Wensheng and Xiao, Daihong},
  title = {Tailoring Strength and Corrosion Resistance in Al–Zn–Mg–Cu Alloys by Total (Zn + Mg) Content and Multi-Directional Forging Process},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {19},
  pages = {4476},
  doi = {10.3390/ma18194476}
}
Kostenlos starten →