Optimization of Process Parameters for Laser Cladding of AlCoCrFeNi High-Entropy Alloy Coating Based on the Taguchi-Grey Relational Analysis
Materials · 25.09.2025 · 18 (19) · 4463
DOI: 10.3390/ma18194463 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 25.09.2025. Verfasst von Andi Huang und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering and Mechanics, Xiangtan University, Xiangtan 411105, China. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Research and Innovation Project for Postgraduate Students of Xiangtan University, Research Start-up Fund of the Education Department of Hunan Province.
Abstract (Originalsprache)
Aircraft engine turbine discs operate under extreme conditions that limit their service life. Laser cladding of AlCoCrFeNi HEA coatings presents a viable solution to enhance their durability. This study optimizes the laser cladding process parameters—specifically, laser power, scanning speed, and powder feed rate—using the Taguchi method in conjunction with grey relational analysis. The optimal parameter set (1450 W, 480 mm/min, 4 r/min) resulted in a coating with a width of 2.93 mm, a height of 1.20 mm, a dilution rate of 22.6%, and a hardness of 532 HV. The optimized process significantly improved hardness by approximately 15% while reducing dilution and elemental segregation in comparison to the initial parameters. This research illustrates the effectiveness of multi-objective optimization in enhancing coating performance, providing a practical approach for the surface strengthening of critical components, such as turbine discs in aircraft engines, under extreme conditions.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical Engineering and Mechanics, Xiangtan University, Xiangtan 411105, China.
- School of Aeronautical Engineering, Hunan Automotive Engineering Vocational University, Zhuzhou 412001, China.
- School of Mechanical Engineering, University of South China, Hengyang 421001, China.
Förderung
- Research and Innovation Project for Postgraduate Students of Xiangtan University
- Research Start-up Fund of the Education Department of Hunan Province
Zitieren
APA
Huang, A., Liu, Y., Liu, J., Yang, S., & Huang, J. (2025). Optimization of Process Parameters for Laser Cladding of AlCoCrFeNi High-Entropy Alloy Coating Based on the Taguchi-Grey Relational Analysis. Materials, 18(19), 4463. https://doi.org/10.3390/ma18194463
Vancouver
Huang A, Liu Y, Liu J, Yang S, Huang J. Optimization of Process Parameters for Laser Cladding of AlCoCrFeNi High-Entropy Alloy Coating Based on the Taguchi-Grey Relational Analysis. Materials. 2025;18(19):4463. doi:10.3390/ma18194463
BibTeX
@article{Huang2025,
author = {Huang, Andi and Liu, Yilong and Liu, Jingang and Yang, Shiping and Huang, Jinghao},
title = {Optimization of Process Parameters for Laser Cladding of AlCoCrFeNi High-Entropy Alloy Coating Based on the Taguchi-Grey Relational Analysis},
journal = {Materials},
year = {2025},
volume = {18},
number = {19},
pages = {4463},
doi = {10.3390/ma18194463}
}
EUVIMED