EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Feasibility Evaluation of Partially Replacing Ordinary Portland Cement with Ferro-Nickel Slag in Ready-Mixed Concrete for Precast Applications

Jin-Su Kim, Jun-Pil Hwang, Chang-Hong Lee iD, Jang-Ho Jay Kim iD

Materials · 15.09.2025 · 18 (18) · 4315

DOI: 10.3390/ma18184315 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 15.09.2025. Verfasst von Jin-Su Kim und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil and Environmental Engineering, Yonsei University, 50, Yonsei-ro, Seodaemun-gu, Seoul 03722, Republic of Korea. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Agency for Infrastructure Technology Advancement.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The global generation of industrial waste is increasing rapidly, with much of it either landfilled or discharged into marine environments, resulting in severe environmental pollution. To address this issue, extensive research has been conducted on utilizing waste materials as partial replacements for cement. Although concrete incorporating industrial by-products offers environmental advantages—such as reducing pollution and lowering CO2 emissions—its application has been limited by poor early-age performance. In South Korea, the annual production of ferronickel slag (FNS) now exceeds 2,000,000 tons, yet its usage remains minimal. To improve this early-age performance, researchers have applied steam curing (SC), a method widely used in precast concrete, which can enhance the utilization of FNS-containing concrete. Some studies have individually evaluated the mechanical or microstructural properties of SC effects, but the combined effects of FNS and SC replacement in precast concrete have rarely been addressed. This study applied SC, a method widely used in precast concrete production, to improve the performance of FNS concrete and conducted a comprehensive evaluation to promote its practical application. For this purpose, ordinary Portland cement (OPC) was partially replaced with FNS at rates of 10%, 20%, and 30%. To assess the effects, tests were conducted on hydration heat, SEM, and XRD, along with evaluations of compressive and splitting tensile strength. Results identified 20% as the optimal replacement ratio. At this ratio, chloride penetration resistance and freeze–thaw durability were also assessed. Furthermore, FNS concrete was evaluated under both natural curing (NC, 28 days) and SC conditions to simulate precast production. Under NC, mechanical properties declined as the FNS content increased, whereas under SC, the performance of the 20% replacement mixture was comparable to that of the control. In addition, the chloride diffusion coefficient and freeze–thaw resistance were improved by 11% and 2%, respectively, under SC compared to NC. This study evaluated the feasibility of FNS-containing concrete, and further studies should be conducted to investigate the structural performance of FNS-containing reinforced concrete via methods such as flexural, shear, splicing, and debonding experiments.

Schlagwörter

Stichwörter der Autor:innen

eco-friendlyferro-nickel slagindustrial wasteprecaststeam curing

Autor:innen und Institutionen

  • School of Civil and Environmental Engineering, Yonsei University, 50, Yonsei-ro, Seodaemun-gu, Seoul 03722, Republic of Korea.
  • Concrete Materials Mechanics Engineering (CMME) Co., Ltd., 11, Tojeong-ro 35-gil, Mapo-gu, Seoul 04166, Republic of Korea.
  • Posco E & C Co., Ltd., 11, Incheon tower-daero, Yeonsu-gu, Incheon 21982, Republic of Korea.

ORCID-Profile: Chang-Hong Lee, Jang-Ho Jay Kim

Förderung

  • Korea Agency for Infrastructure Technology Advancement

Zitieren

APA

Kim, J. S., Hwang, J. P., Lee, C. H., & Kim, J. J. (2025). Feasibility Evaluation of Partially Replacing Ordinary Portland Cement with Ferro-Nickel Slag in Ready-Mixed Concrete for Precast Applications. Materials, 18(18), 4315. https://doi.org/10.3390/ma18184315

Vancouver

Kim JS, Hwang JP, Lee CH, Kim JJ. Feasibility Evaluation of Partially Replacing Ordinary Portland Cement with Ferro-Nickel Slag in Ready-Mixed Concrete for Precast Applications. Materials. 2025;18(18):4315. doi:10.3390/ma18184315

BibTeX
@article{Kim2025,
  author = {Kim, Jin-Su and Hwang, Jun-Pil and Lee, Chang-Hong and Kim, Jang-Ho Jay},
  title = {Feasibility Evaluation of Partially Replacing Ordinary Portland Cement with Ferro-Nickel Slag in Ready-Mixed Concrete for Precast Applications},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {18},
  pages = {4315},
  doi = {10.3390/ma18184315}
}
Kostenlos starten →