EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Photocatalytic Degradation of Rhodamine B Using 1D CuO/TiO2 Nanofibers Synthesized via the Electrospinning Method

Shouzhen Duan, Wanjun Zhang, Xiaoyan Wang, Youqing Zhao, Hui Nan, Guijun Yang iD

Materials · 11.09.2025 · 18 (18) · 4252

DOI: 10.3390/ma18184252 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 11.09.2025. Verfasst von Shouzhen Duan und 5 weiteren Autor:innen. Beteiligte Einrichtung: Chemical Engineering Institute, Qinghai University, Xining 810016, China. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the special project of Qinghai Provincial Department of Science and Technology, special project of the Qinghai Provincial Department of Science and Technology, Qinghai University Innovation and Entrepreneurship Training Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research was designed to improve the separation efficiency of photogenerated carriers in TiO2 through the construction of a PN heterojunction. The motivation behind this was to tackle the problems of the narrow light response range and the high electron-hole recombination rate of TiO2. By simple one-step implementing electrospinning and calcination procedures, CuO/TiO2 PN heterojunction nanofibers were successfully synthesized. XRD and SEM analyses confirm that the heterojunction is a nanofiber structure composed of TiO2 and CuO, with the TiO2 containing anatase and rutile phases. The PL reveals that the fluorescence intensity of the heterojunction is lower compared to that of pure TiO2, and this implies a remarkable enhancement in the carrier separation efficiency. Under xenon light irradiation, for the optimized sample, the degradation rate of RhB exceeds 80%. This degradation rate is 68% higher than that of pure TiO2. The improvement in photocatalytic performance can be ascribed to the efficient charge separation driven by the built-in electric field within the PN junction and the extended light absorption range. The photoelectrochemical test further verified that the photocurrent density of the heterojunction system was 52.42% higher than that of the single TiO2, providing a new strategy for designing efficient photocatalytic systems.

Schlagwörter

Stichwörter der Autor:innen

CuOPN junctionTiO2electrospinning methodphotocatalytic

Autor:innen und Institutionen

  • Chemical Engineering Institute, Qinghai University, Xining 810016, China.
  • New Energy Branch, Huanghe Hydropower Development Co., Ltd., Xining 810006, China.

ORCID-Profile: Guijun Yang

Förderung

  • the special project of Qinghai Provincial Department of Science and Technology
  • special project of the Qinghai Provincial Department of Science and Technology
  • Qinghai University Innovation and Entrepreneurship Training Program

Zitieren

APA

Duan, S., Zhang, W., Wang, X., Zhao, Y., Nan, H., & Yang, G. (2025). Photocatalytic Degradation of Rhodamine B Using 1D CuO/TiO2 Nanofibers Synthesized via the Electrospinning Method. Materials, 18(18), 4252. https://doi.org/10.3390/ma18184252

Vancouver

Duan S, Zhang W, Wang X, Zhao Y, Nan H, Yang G. Photocatalytic Degradation of Rhodamine B Using 1D CuO/TiO2 Nanofibers Synthesized via the Electrospinning Method. Materials. 2025;18(18):4252. doi:10.3390/ma18184252

BibTeX
@article{Duan2025,
  author = {Duan, Shouzhen and Zhang, Wanjun and Wang, Xiaoyan and Zhao, Youqing and Nan, Hui and Yang, Guijun},
  title = {Photocatalytic Degradation of Rhodamine B Using 1D CuO/TiO2 Nanofibers Synthesized via the Electrospinning Method},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {18},
  pages = {4252},
  doi = {10.3390/ma18184252}
}
Kostenlos starten →