EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Utilization of Birch Bark-Derived Suberinic Acid Residues as Additives in High-Density Fiberboard Production

Julia Dasiewicz iD, Anita Wronka iD, Janis Rizikovs iD, Grzegorz Kowaluk iD

Materials · 05.09.2025 · 18 (17) · 4171

DOI: 10.3390/ma18174171 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 05.09.2025. Verfasst von Julia Dasiewicz und 3 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Wood Technology, Warsaw University of Life Sciences-SGGW, Nowoursynowska Street 159, 02-787 Warsaw, Poland. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Centre, ERA-NET Cofund ForestValue program through Vinnova (Sweden); Valsts izglītības attīstības aģentūra (Latvia); the Ministry of Education, Science and Sport (JIA)…, Horizon 2020 Research and Innovation program of the European Union.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the use of suberinic acid residues (SARs), derived from birch outer bark, as a bio-based additive in high-density fiberboard (HDF). Boards with target densities of 800 kg m−3 were produced with SAR contents of 0, 1, 5, 10, 20, and 50%. Standardized tests evaluated mechanical properties: screw withdrawal resistance, modulus of elasticity, modulus of rupture, and internal bond, as well as moisture resistance through surface water absorption, water absorption, and thickness swelling. Density profiles were also analyzed. SAR content influenced HDF performance in a concentration-dependent manner. The most notable improvements in mechanical properties occurred at 5% SAR, where fine particles likely enhanced internal bonding and stiffness. However, higher SAR levels led to reduced mechanical strength, possibly due to an excessive particle surface area exceeding the adhesive’s bonding capacity. Moisture resistance declined with increased SAR, attributed to its hydrophilic nature and process parameters, although SAR-modified boards still outperformed those with other biodegradable additives like starch. SAR also affected the density profile, improving core densification at moderate levels. Overall, SAR shows potential as a renewable additive for enhancing HDF performance, particularly at low concentrations, balancing mechanical strength and environmental benefits.

Schlagwörter

Stichwörter der Autor:innen

fiberboard modificationindustrial bark residueslignocellulosic materials

Autor:innen und Institutionen

  • Faculty of Wood Technology, Warsaw University of Life Sciences-SGGW, Nowoursynowska Street 159, 02-787 Warsaw, Poland.
  • Department of Technology and Entrepreneurship in Wood Industry, Institute of Wood Sciences and Furniture, Warsaw University of Life Sciences-SGGW, 02-787 Warsaw, Poland.
  • Latvian State Institute of Wood Chemistry, LV-1006 Riga, Latvia.

ORCID-Profile: Julia Dasiewicz, Anita Wronka, Janis Rizikovs, Grzegorz Kowaluk

Förderung

  • National Science Centre
  • ERA-NET Cofund ForestValue program through Vinnova (Sweden); Valsts izglītības attīstības aģentūra (Latvia); the Ministry of Education, Science and Sport (JIA)…
  • Horizon 2020 Research and Innovation program of the European Union

Zitieren

APA

Dasiewicz, J., Wronka, A., Rizikovs, J., & Kowaluk, G. (2025). Utilization of Birch Bark-Derived Suberinic Acid Residues as Additives in High-Density Fiberboard Production. Materials, 18(17), 4171. https://doi.org/10.3390/ma18174171

Vancouver

Dasiewicz J, Wronka A, Rizikovs J, Kowaluk G. Utilization of Birch Bark-Derived Suberinic Acid Residues as Additives in High-Density Fiberboard Production. Materials. 2025;18(17):4171. doi:10.3390/ma18174171

BibTeX
@article{Dasiewicz2025,
  author = {Dasiewicz, Julia and Wronka, Anita and Rizikovs, Janis and Kowaluk, Grzegorz},
  title = {Utilization of Birch Bark-Derived Suberinic Acid Residues as Additives in High-Density Fiberboard Production},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {17},
  pages = {4171},
  doi = {10.3390/ma18174171}
}
Kostenlos starten →