EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study of Structure and Phase Formation During Thermal Treatment of Geopolymer Compositions Based on Mineral Waste

Elena A Yatsenko iD, Sergei V Trofimov iD, Yuri V Novikov, Boris M Goltsman iD, Vitaliy V Sergeev

Materials · 03.09.2025 · 18 (17) · 4132

DOI: 10.3390/ma18174132 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 03.09.2025. Verfasst von Elena A Yatsenko und 4 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Technology, Platov South-Russian State Polytechnic University (NPI), Prosveshcheniya Street, 132, Novocherkassk 346428, Russia. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education of the Russian Federation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A comprehensive study was conducted to investigate the influence of mineral waste on the thermal stability of foamed geopolymer materials. The study’s objects were steelmaking slag (SS) from the Taganrog Metallurgical Plant, drilling sludge (DS) from the Sutorminskoye oil field, and an ash and slag mixture (ASM) from the Novocherkasskaya SDPP. The utilisation of drilling sludge as an additive in the production of geopolymers has been proposed for the first time. The study involved the development of alkaline activators based on solutions of sodium and potassium silicates and their hydroxides. The samples were synthesised with varying proportions of steelmaking slag and drilling sludge, and physicochemical, mechanical and high-temperature studies were conducted to ascertain the optimal composition. X-ray phase analysis of the synthesised samples was conducted. An investigation was conducted into alterations in the phase composition of the material as a consequence of heat treatment. Proposals were hereby made for the mechanisms of the formation of new phases. The study identified an alkaline activator based on a solution of silicate and sodium hydroxide, with the introduction of 10% steelmaking slag into the component mixture, as the most effective mixture. The resultant geopolymers exhibited a density of 311 kg/m3 and an ultimate compressive strength of 1.54 MPa.

Schlagwörter

Stichwörter der Autor:innen

drilling sludgefoamingindustrial wasteporous geopolymerssteel slagstructurethermal stabilitythermal transformation

Autor:innen und Institutionen

  • Faculty of Technology, Platov South-Russian State Polytechnic University (NPI), Prosveshcheniya Street, 132, Novocherkassk 346428, Russia.
  • Peter the Great Saint Petersburg Polytechnic University, Politekhnicheskaya Street, 29, Saint Petersburg 195251, Russia.

ORCID-Profile: Elena A Yatsenko, Sergei V Trofimov, Boris M Goltsman

Förderung

  • Ministry of Science and Higher Education of the Russian Federation

Zitieren

APA

Yatsenko, E. A., Trofimov, S. V., Novikov, Y. V., Goltsman, B. M., & Sergeev, V. V. (2025). Study of Structure and Phase Formation During Thermal Treatment of Geopolymer Compositions Based on Mineral Waste. Materials, 18(17), 4132. https://doi.org/10.3390/ma18174132

Vancouver

Yatsenko EA, Trofimov SV, Novikov YV, Goltsman BM, Sergeev VV. Study of Structure and Phase Formation During Thermal Treatment of Geopolymer Compositions Based on Mineral Waste. Materials. 2025;18(17):4132. doi:10.3390/ma18174132

BibTeX
@article{Yatsenko2025,
  author = {Yatsenko, Elena A and Trofimov, Sergei V and Novikov, Yuri V and Goltsman, Boris M and Sergeev, Vitaliy V},
  title = {Study of Structure and Phase Formation During Thermal Treatment of Geopolymer Compositions Based on Mineral Waste},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {17},
  pages = {4132},
  doi = {10.3390/ma18174132}
}
Kostenlos starten →