Effect of Laser Scanning Speed on Microstructure and Properties of Laser Cladding NiAlNbTiV High-Entropy Coatings
Materials · 31.08.2025 · 18 (17) · 4076
DOI: 10.3390/ma18174076 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 31.08.2025. Verfasst von Huan Yan und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials, Shanghai Dianji University, Shanghai 201306, China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Natural Science Foundation of Shanghai, Three-year Action Plan of Shanghai Science and Technology Commission, Natural Science Foundation of Shanghai.
Abstract (Originalsprache)
High-entropy alloys (HEAs) exhibit superior properties for extreme environments, yet the effects of laser scanning speed on the microstructure and performance of laser-clad NiAlNbTiV HEA coatings remain unclear. This study systematically investigates NiAlNbTiV coatings on 316 stainless steel fabricated at scanning speeds of 800–1100 mm/min via laser cladding. Characterizations via XRD, SEM/EDS, microhardness testing, high-temperature wear testing, and electrochemical measurements reveal that increasing scanning speed enhances the cooling rate, promoting γ-(Ni, Fe) solid solution formation, intensifying TiV peaks, and reducing Fe-Nb intermetallics. Higher speeds refine grains and needle-like crystal distributions but introduce point defects and cracks at 1100 mm/min. Microhardness decreases from 606.2 HV (800 mm/min) to 522.4 HV (1100 mm/min). The 800 mm/min coating shows optimal wear resistance (wear volume: 0.0117 mm3) due to dense eutectic hard phases, while higher speeds degrade wear performance via increased defects. Corrosion resistance follows a non-linear trend, with the 900 mm/min coating achieving the lowest corrosion current density (1.656 μA·cm−2) due to fine grains and minimal defects. This work provides parametric optimization guidance for laser-clad HEA coatings in extreme-condition engineering applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials, Shanghai Dianji University, Shanghai 201306, China.
- School of Mechanical Engineering, Shanghai Dianji University, Shanghai 201306, China.
- School of Aeronautics, Shanghai Dianji University, Shanghai 201306, China.
Förderung
- the Natural Science Foundation of Shanghai
- Three-year Action Plan of Shanghai Science and Technology Commission
- Natural Science Foundation of Shanghai
- Shanghai Science and Technology Commission
Zitieren
APA
Yan, H., Lu, S., Li, L., Huang, W., & Liang, C. (2025). Effect of Laser Scanning Speed on Microstructure and Properties of Laser Cladding NiAlNbTiV High-Entropy Coatings. Materials, 18(17), 4076. https://doi.org/10.3390/ma18174076
Vancouver
Yan H, Lu S, Li L, Huang W, Liang C. Effect of Laser Scanning Speed on Microstructure and Properties of Laser Cladding NiAlNbTiV High-Entropy Coatings. Materials. 2025;18(17):4076. doi:10.3390/ma18174076
BibTeX
@article{Yan2025,
author = {Yan, Huan and Lu, Shuangli and Li, Lei and Huang, Wen and Liang, Chen},
title = {Effect of Laser Scanning Speed on Microstructure and Properties of Laser Cladding NiAlNbTiV High-Entropy Coatings},
journal = {Materials},
year = {2025},
volume = {18},
number = {17},
pages = {4076},
doi = {10.3390/ma18174076}
}
EUVIMED