EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructure Evolution and Mechanical Properties of Wire Arc Additively Manufactured DSS2209 Duplex Stainless Steel

Jian Sun, Liang Liu, Long Zhang iD, Jun Hong, Feihong Liu, Dongsheng Wang iD, Fei Zhou, Youwen Yang

Materials · 30.08.2025 · 18 (17) · 4066

DOI: 10.3390/ma18174066 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 30.08.2025. Verfasst von Jian Sun und 7 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Construction Hydraulic Robots of Anhui Higher Education Institutes, Tongling University, Tongling 244061, China. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Anhui Provincial Natural Science Foundation, Key Laboratory of Construction Hydraulic Robots of Anhui Higher Education Institutes, Tongling University, Anhui Province Key Laboratory of Metallurgical Engineering & Resources Recycling.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the microstructure evolution and mechanical properties of DSS2209 duplex stainless steel fabricated via cold metal transfer wire arc additive manufacturing (CMT-WAAM). The as-deposited thin-wall components exhibit significant microstructural heterogeneity along the build height due to thermal history variations. Optical microscopy, SEM-EDS, and EBSD analyses reveal distinct phase distributions: the bottom region features elongated blocky austenite with Widmanstätten austenite (WA) due to rapid substrate-induced cooling; the middle region shows equiaxed blocky austenite with reduced grain boundary austenite (GBA) and WA, attributed to interlayer thermal cycling promoting recrystallization and grain refinement (average austenite grain size: 4.16 μm); and the top region displays coarse blocky austenite from slower cooling. Secondary austenite (γ2) forms in interlayer remelted zones with Cr depletion, impacting pitting resistance. Mechanical testing demonstrates anisotropy; horizontal specimens exhibit higher strength (UTS: 610 MPa, YS: 408 MPa) due to layer-uniform microstructures, while vertical specimens show greater ductility (elongation) facilitated by columnar grains aligned with the build direction. Hardness ranges uniformly between 225–239 HV. The study correlates process-induced thermal gradients (e.g., cooling rates, interlayer cycling) with microstructural features (recrystallization fraction, grain size, phase morphology) and performance, providing insights for optimizing WAAM of large-scale duplex stainless steel components like marine propellers.

Schlagwörter

Stichwörter der Autor:innen

2209 duplex stainless steelinterlayer thermal cyclingmechanical propertiesmicrostructure evolutionthermal gradientwire arc additive manufacturing

Autor:innen und Institutionen

  • Key Laboratory of Construction Hydraulic Robots of Anhui Higher Education Institutes, Tongling University, Tongling 244061, China.
  • School of Metallurgical Engineering, Anhui University of Technology, Ma'anshan 243002, China.
  • Technical Department, Anhui Highly Precision Casting Co., Ltd., Ma'anshan 238100, China.

ORCID-Profile: Long Zhang, Dongsheng Wang

Förderung

  • Anhui Provincial Natural Science Foundation
  • Key Laboratory of Construction Hydraulic Robots of Anhui Higher Education Institutes, Tongling University
  • Anhui Province Key Laboratory of Metallurgical Engineering & Resources Recycling
  • Tongling University Talent Research Start-up Fund Project
  • Natural Science Research Fund Project of Tongling University
  • Tongling University Industry University Research Project
  • Anhui Province University Outstanding Scientific Research Innovation Team Project

Zitieren

APA

Sun, J., Liu, L., Zhang, L., Hong, J., Liu, F., Wang, D., Zhou, F., & Yang, Y. (2025). Microstructure Evolution and Mechanical Properties of Wire Arc Additively Manufactured DSS2209 Duplex Stainless Steel. Materials, 18(17), 4066. https://doi.org/10.3390/ma18174066

Vancouver

Sun J, Liu L, Zhang L, Hong J, Liu F, Wang D, et al. Microstructure Evolution and Mechanical Properties of Wire Arc Additively Manufactured DSS2209 Duplex Stainless Steel. Materials. 2025;18(17):4066. doi:10.3390/ma18174066

BibTeX
@article{Sun2025,
  author = {Sun, Jian and Liu, Liang and Zhang, Long and Hong, Jun and Liu, Feihong and Wang, Dongsheng and Zhou, Fei and Yang, Youwen},
  title = {Microstructure Evolution and Mechanical Properties of Wire Arc Additively Manufactured DSS2209 Duplex Stainless Steel},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {17},
  pages = {4066},
  doi = {10.3390/ma18174066}
}
Kostenlos starten →