EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Zr Additions on the Microstructure and Elevated-Temperature Mechanical Properties of Al–Cu–Mg–Ag–Zn–Mn–Zr Alloys

Haoyang Fu, Hongda Yan, Bin Wei, Bin Sun, Zihang Liu iD, Weihong Gao

Materials · 29.08.2025 · 18 (17) · 4062

DOI: 10.3390/ma18174062 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 29.08.2025. Verfasst von Haoyang Fu und 5 weiteren Autor:innen. Beteiligte Einrichtung: College of Materials Science and Chemical Engineering, Harbin Engineering University, Harbin 150001, China. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Central University Fund, Basic Product Innovation Research.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study systematically investigates the influence of Zr additions (0–0.24 wt.%) on the microstructure evolution and mechanical properties of Al–4.0Cu–0.5Mg–0.5Zn–0.5Mn–0.4Ag alloys under peak-aged conditions. Alloys were subjected to homogenization (420 °C/8 h + 510 °C/16 h), solution treatment (510 °C/1.5 h), and aging (190 °C/3 h). Microstructural characterization via OM, SEM, EBSD, and TEM revealed that Zr refines grains and enhances recrystallization resistance through coherent Al3Zr precipitates, which pin grain boundaries and dislocations. However, excessive Zr (0.24 wt.%) induces heterogeneous grain size distribution and significant Schmid factor variations, promoting stress concentration and premature intergranular cracking. Crucially, Al3Zr particles act as heterogeneous nucleation sites for Ω-phase precipitates, accelerating their nucleation near grain boundaries, refining precipitates, and narrowing precipitate-free zones (PFZs). Mechanical testing demonstrated that the Al–4.0Cu–0.5Mg–0.5Zn–0.5Mn–0.4Ag alloy exhibits optimal properties: peak tensile strength of 368.8 MPa and 79.8% tensile strength retention at 200 °C. These improvements are attributed to synergistic microstructural modifications driven by controlled Zr addition, establishing Al–4.0Cu–0.5Mg–0.5Zn–0.5Mn–0.4Ag–0.16Zr as a promising candidate for high-temperature aerospace applications.

Schlagwörter

Stichwörter der Autor:innen

Al–Cu–Mg–Ag alloyelevated-temperature mechanical propertiesheterogeneous nucleationmicrostructurezirconium additions

Autor:innen und Institutionen

  • College of Materials Science and Chemical Engineering, Harbin Engineering University, Harbin 150001, China.
  • Wuxi Little Swan Company Limited, Wuxi 214028, China.
  • State Key Laboratory of Precision Welding & Joining of Materials and Structures, Harbin Institute of Technology, Harbin 150001, China.
  • Yangtze Delta Region Advanced Research Institute, Harbin Engineering University, Nantong 226000, China.

ORCID-Profile: Zihang Liu

Förderung

  • National Natural Science Foundation of China
  • Central University Fund
  • Basic Product Innovation Research
  • National Science and Technology Project
  • the Study on Tribology and Lubrication Technology of the Marine Low-Speed Engine

Zitieren

APA

Fu, H., Yan, H., Wei, B., Sun, B., Liu, Z., & Gao, W. (2025). Effect of Zr Additions on the Microstructure and Elevated-Temperature Mechanical Properties of Al–Cu–Mg–Ag–Zn–Mn–Zr Alloys. Materials, 18(17), 4062. https://doi.org/10.3390/ma18174062

Vancouver

Fu H, Yan H, Wei B, Sun B, Liu Z, Gao W. Effect of Zr Additions on the Microstructure and Elevated-Temperature Mechanical Properties of Al–Cu–Mg–Ag–Zn–Mn–Zr Alloys. Materials. 2025;18(17):4062. doi:10.3390/ma18174062

BibTeX
@article{Fu2025,
  author = {Fu, Haoyang and Yan, Hongda and Wei, Bin and Sun, Bin and Liu, Zihang and Gao, Weihong},
  title = {Effect of Zr Additions on the Microstructure and Elevated-Temperature Mechanical Properties of Al–Cu–Mg–Ag–Zn–Mn–Zr Alloys},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {17},
  pages = {4062},
  doi = {10.3390/ma18174062}
}
Kostenlos starten →