EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Improving the Microstructure and Mechanical Properties of Al-0.7Fe-0.4Mg-0.1Si-0.5Er Alloy by Equal Channel Angular Pressing

Xingchi He iD, Fuyu Dong, Yue Zhang iD

Materials · 27.08.2025 · 18 (17) · 4007

DOI: 10.3390/ma18174007 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 27.08.2025. Verfasst von Xingchi He und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Shenyang University of Technology, Shenyang 110870, China. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: yue zhang, the National Natural Science Foundation of China, the Natural Science Foundation of Department of Science and Technology of Liaoning Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The ECAP (equal channel angular pressing) technique plays a crucial role in enhancing the overall performance of aluminum alloys. In this study, ECAP was applied to a self-developed micro-alloyed Al-0.7Fe-0.4Mg-0.1Si-0.5Er aluminum alloy to investigate the strengthening effects of varying numbers of passes. The results show that after four ECAP passes, the alloy achieved a high tensile strength (208 MPa), yield strength (175.4 MPa), elongation after fracture (10.8%), and a relatively high electrical conductivity (57.1%IACS). The enhanced strength is primarily attributed to precipitation strengthening (σp), grain refinement strengthening (σgbs), and dislocation strengthening (σdis). The grain refinement is a result of dynamic recrystallization (DRX) induced by severe plastic deformation. This study demonstrates that ECAP enables a significant improvement in the mechanical properties (82.3%) of the alloy while causing only a marginal reduction (2.9%) in electrical conductivity. These findings provide both technological and theoretical support for the manufacturing of high-performance conductors and other lightweight electrical structural components.

Schlagwörter

Stichwörter der Autor:innen

electrical conductivityequal channel angular pressinghomogenization annealingmicro-alloying aluminum alloytensile strength

Autor:innen und Institutionen

  • School of Materials Science and Engineering, Shenyang University of Technology, Shenyang 110870, China.

ORCID-Profile: Xingchi He, Yue Zhang

Förderung

  • yue zhang
  • the National Natural Science Foundation of China
  • the Natural Science Foundation of Department of Science and Technology of Liaoning Province

Zitieren

APA

He, X., Dong, F., & Zhang, Y. (2025). Improving the Microstructure and Mechanical Properties of Al-0.7Fe-0.4Mg-0.1Si-0.5Er Alloy by Equal Channel Angular Pressing. Materials, 18(17), 4007. https://doi.org/10.3390/ma18174007

Vancouver

He X, Dong F, Zhang Y. Improving the Microstructure and Mechanical Properties of Al-0.7Fe-0.4Mg-0.1Si-0.5Er Alloy by Equal Channel Angular Pressing. Materials. 2025;18(17):4007. doi:10.3390/ma18174007

BibTeX
@article{He2025,
  author = {He, Xingchi and Dong, Fuyu and Zhang, Yue},
  title = {Improving the Microstructure and Mechanical Properties of Al-0.7Fe-0.4Mg-0.1Si-0.5Er Alloy by Equal Channel Angular Pressing},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {17},
  pages = {4007},
  doi = {10.3390/ma18174007}
}
Kostenlos starten →