Influence of Tension and Tension Fluctuation on the Structure and Mechanical Properties of Polyester Fibers During the Spinning Process Based on Non-Contact Tension Detection
Materials · 25.08.2025 · 18 (17) · 3972
DOI: 10.3390/ma18173972 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 25.08.2025. Verfasst von Wanhe Du und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Intelligent Manufacturing and Control Engineering, Shanghai Polytechnic University, Shanghai 201209, China. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key R&D Program of China, Southeast University and Tanac Automation Co., Ltd. Postdoctoral Research Workstation, Shanghai Polytechnic University, Natural Science Foundation of Shanghai.
Abstract (Originalsprache)
The precise measuring and control of fiber tension are critically important for enhancing structural and mechanical properties in spinning processes, as tension directly influences orientation, crystallinity, and mechanical properties. However, current tension measurement methods primarily operate offline and lack real-time measuring capabilities. A non-contact fiber tension detection system is introduced to investigate the effects of draw tension and its uniformity on the structure and mechanical properties of polyester fibers. During experiments conducted at a spinning speed of 1200 m/min across different draw ratios, the non-contact system demonstrated strong agreement with the contact tension detector. The results showed that increasing the tension from 34 cN to 164 cN reduced the monofilament diameter from 39.61 µm to 20.35 µm. Simultaneously, the orientation factor nearly tripled, while crystallinity increased from 55.72% to 77.39%. Mechanical testing revealed a 50.96% improvement in breaking strength, rising from 1.57 to 2.37 cN/dtex, accompanied by a significant decrease in elongation at break from 275.55% to 34.95%. However, tension fluctuations, characterized by an average fluctuation coefficient increase from 4.51% to 18.18%, caused diameter inconsistency. These fluctuations also reduced the orientation factor by 10.78%, lowered crystallinity, and substantially deteriorated mechanical properties. These findings underscore the critical importance of real-time, online tension monitoring for ensuring polyester fiber quality and performance during production.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Intelligent Manufacturing and Control Engineering, Shanghai Polytechnic University, Shanghai 201209, China.
- Tanac Automation Co., Ltd., Jiashan, Zhengjiang 314100, China.
- School of Mechanical Engineering, Southeast University, Nanning 211189, China.
- School of Engineering, Sanda University, Shanghai 201209, China.
- College of Mechanical Engineering, Donghua University, Shanghai 201620, China.
ORCID-Profile: Dongjian Zhang
Förderung
- National Key R&D Program of China
- Southeast University and Tanac Automation Co., Ltd. Postdoctoral Research Workstation, Shanghai Polytechnic University
- Natural Science Foundation of Shanghai
- Textile Vision Science & Education Foundation
- Jiangsu Province Industry-University-Research Cooperation Project
- National Key R&D Program of China
- Southeast University
- Tanac Automation Co., Ltd. Postdoctoral Research Workstation
Zitieren
APA
Du, W., Zhang, D., Fan, W., Yang, S., & Gan, X. (2025). Influence of Tension and Tension Fluctuation on the Structure and Mechanical Properties of Polyester Fibers During the Spinning Process Based on Non-Contact Tension Detection. Materials, 18(17), 3972. https://doi.org/10.3390/ma18173972
Vancouver
Du W, Zhang D, Fan W, Yang S, Gan X. Influence of Tension and Tension Fluctuation on the Structure and Mechanical Properties of Polyester Fibers During the Spinning Process Based on Non-Contact Tension Detection. Materials. 2025;18(17):3972. doi:10.3390/ma18173972
BibTeX
@article{Du2025,
author = {Du, Wanhe and Zhang, Dongjian and Fan, Wei and Yang, Shuzhen and Gan, Xuehui},
title = {Influence of Tension and Tension Fluctuation on the Structure and Mechanical Properties of Polyester Fibers During the Spinning Process Based on Non-Contact Tension Detection},
journal = {Materials},
year = {2025},
volume = {18},
number = {17},
pages = {3972},
doi = {10.3390/ma18173972}
}
EUVIMED