EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Biochar as a Sustainable Component of Low-Emission Building Materials

Iwona Ryłko iD, Robert Zarzycki iD, Łukasz Bobak iD, Paweł Telega iD, Agnieszka Didyk-Mucha, Andrzej Białowiec iD

Materials · 22.08.2025 · 18 (17) · 3941

DOI: 10.3390/ma18173941 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 22.08.2025. Verfasst von Iwona Ryłko und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Applied Bioeconomy, Wrocław University of Environmental and Life Sciences, 37a Chełmońskiego Str., 51-630 Wrocław, Poland. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Polish Ministry of Science and Higher Education, Polish Ministry of Education and Science, Wrocław University of Environmental and Life Sciences.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Biochar (BC), derived from wood biomass through pyrolysis, exhibits properties that make it a promising additive in mortars for sustainable construction. This study investigated the influence of biochar produced at three pyrolysis temperatures (450 °C, 550 °C, and 700 °C) on the performance of cementitious adhesive mortars. The evaluation encompassed physicochemical characterization, mechanical and adhesive strength, volatile organic compound (VOC) emissions, leachability of contaminants, and a life-cycle assessment (LCA). The results demonstrate that biochar obtained at 700 °C has the highest carbon content, an alkaline pH, and increased porosity. In contrast, biochar produced at 450 °C exhibits better sorption capacity and a higher concentration of functional groups. Incorporating 1–5% BC (produced at any temperature) improves mortar performance; however, higher doses negatively affect adhesion to expanded polystyrene board (EPS) and concrete. Emissions of VOCs and leachable metals largely remained within environmental threshold values, with only isolated instances of exceedance. The LCA revealed that substituting mineral fillers with biochar could reduce the carbon footprint by up to 35% compared to the reference formulation. These findings confirm biochar’s potential as a safe and environmentally beneficial component in low-emission construction materials, aligning with the principles of the circular economy and climate-neutral goals.

Schlagwörter

Stichwörter der Autor:innen

LCAVOCbiocharcarbon footprintlow emissionpyrolysiswood chips

Autor:innen und Institutionen

  • Department of Applied Bioeconomy, Wrocław University of Environmental and Life Sciences, 37a Chełmońskiego Str., 51-630 Wrocław, Poland.
  • Department of Advanced Energy Technologies, Czestochowa University of Technology, 73 J.H. Dąbrowskiego St., 42-200 Częstochowa, Poland.
  • Selena Industrial Technologies, Pieszycka 1, 58-200 Dzierzoniów, Poland.

ORCID-Profile: Iwona Ryłko, Robert Zarzycki, Łukasz Bobak, Paweł Telega, Andrzej Białowiec

Förderung

  • Polish Ministry of Science and Higher Education
  • Polish Ministry of Education and Science
  • Wrocław University of Environmental and Life Sciences

Zitieren

APA

Ryłko, I., Zarzycki, R., Bobak, Ł., Telega, P., Didyk-Mucha, A., & Białowiec, A. (2025). Biochar as a Sustainable Component of Low-Emission Building Materials. Materials, 18(17), 3941. https://doi.org/10.3390/ma18173941

Vancouver

Ryłko I, Zarzycki R, Bobak Ł, Telega P, Didyk-Mucha A, Białowiec A. Biochar as a Sustainable Component of Low-Emission Building Materials. Materials. 2025;18(17):3941. doi:10.3390/ma18173941

BibTeX
@article{Ryko2025,
  author = {Ryłko, Iwona and Zarzycki, Robert and Bobak, Łukasz and Telega, Paweł and Didyk-Mucha, Agnieszka and Białowiec, Andrzej},
  title = {Biochar as a Sustainable Component of Low-Emission Building Materials},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {17},
  pages = {3941},
  doi = {10.3390/ma18173941}
}
Kostenlos starten →