Numerical Simulation Study on Non-Axisymmetric Die-Less Spinning with a Right-Angle Groove in the Tube
Materials · 18.08.2025 · 18 (16) · 3858
DOI: 10.3390/ma18163858 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 18.08.2025. Verfasst von Xuesong Ren und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Aerospace Engineering, Shenyang Aerospace University, Shenyang 110136, China. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Liaoning Provincial Department of Education Fund, Fundamental research funds for the universities of liaoning province.
Abstract (Originalsprache)
To address the challenges of non-axisymmetric tube spinning, this study employs finite element simulations to validate a novel spinning method for right-angle groove tubes. Three forming schemes with distinct roller path geometries were designed and analyzed using Simufact Forming, with 6063-O aluminum alloy tubes serving as the research material. The simulation results indicate that multi-pass forming (Schemes I and II) significantly enhances wall thickness uniformity compared to single-pass forming (Scheme III). Scheme I exhibits optimal performance due to the minimized equivalent stress in the final forming pass. The maximum stress is concentrated at the groove bottom, leading to wall thinning and springback, while the maximum strain occurs at the roller exit point, where metal accumulation causes local wall thickening. Experimental observations confirm the consistency with the simulation results, validating the model’s reliability. This study deepens the understanding of deformation mechanisms in complex groove forming, highlighting the roller path geometry in controlling stress-strain distribution and final product quality.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Aerospace Engineering, Shenyang Aerospace University, Shenyang 110136, China.
- Prosper Metal Forming Corporation, Xi'an 710089, China.
ORCID-Profile: Xuesong Ren, Zhen Jia
Förderung
- National Natural Science Foundation of China
- Liaoning Provincial Department of Education Fund
- Fundamental research funds for the universities of liaoning province
- Liaoning Provincial Department of Education Fund, China
Zitieren
APA
Ren, X., Fan, Z., Jia, Z., Shen, Y., & You, H. (2025). Numerical Simulation Study on Non-Axisymmetric Die-Less Spinning with a Right-Angle Groove in the Tube. Materials, 18(16), 3858. https://doi.org/10.3390/ma18163858
Vancouver
Ren X, Fan Z, Jia Z, Shen Y, You H. Numerical Simulation Study on Non-Axisymmetric Die-Less Spinning with a Right-Angle Groove in the Tube. Materials. 2025;18(16):3858. doi:10.3390/ma18163858
BibTeX
@article{Ren2025,
author = {Ren, Xuesong and Fan, Zuojun and Jia, Zhen and Shen, Yongping and You, Huanzhang},
title = {Numerical Simulation Study on Non-Axisymmetric Die-Less Spinning with a Right-Angle Groove in the Tube},
journal = {Materials},
year = {2025},
volume = {18},
number = {16},
pages = {3858},
doi = {10.3390/ma18163858}
}
EUVIMED