Femtosecond Laser Single-Spot Welding of Sapphire/Invar Alloy
Materials · 15.08.2025 · 18 (16) · 3839
DOI: 10.3390/ma18163839 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 15.08.2025. Verfasst von Yuyang Chen und 4 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Precision Manufacturing for Extreme Service Performance, College of Mechanical and Electrical Engineering, Central South Univ…. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, National Key R&D Program of China, Science and Technology Innovation Program of Hunan Province.
Abstract (Originalsprache)
Ultrafast laser welding of glass/metal heterostructures has found extensive applications in sensors, medical devices, and optical systems. However, achieving high-stability, high-quality welds under non-optical contact conditions remains challenging due to severe internal damage within glass materials. This study addresses thermal management through synergistic control of thermal accumulation effects and material ablation thresholds. Using the sapphire/Invar alloy system as a model for glass/metal welding, we investigated thermal accumulation effects during ultrafast laser ablation of Invar alloy through theoretical simulations. Under a repetition rate of 1 MHz, the femtosecond laser raised the lattice equilibrium temperature by 700 K within 10 microseconds, demonstrating that high repetition rate femtosecond lasers can induce effective heat accumulation in Invar alloy. Furthermore, ablation thresholds for both materials were determined across varying repetition rates via the D2 method, with corresponding threshold curves systematically constructed. Finally, based on the simulation and ablation threshold calculation results, laser parameters were selected for ultrafast laser single point welding of sapphire and Invar alloy. The experimental results demonstrate effective thermal effect mitigation, achieving a maximum shear strength of 63.37 MPa. Comparative analysis against traditional scan welding further validates the superiority of our approach in thermal management. This work provides foundational theoretical and methodological guidance for ultrafast laser welding of glass/metal heterostructures.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Precision Manufacturing for Extreme Service Performance, College of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China.
ORCID-Profile: Xianshi Jia, Kai Li
Förderung
- National Natural Science Foundation of China
- National Key R&D Program of China
- Science and Technology Innovation Program of Hunan Province
- Natural Science Foundation of Hunan Province
- National Key R&D Program of China
- Advanced Laser Technology Laboratory of Anhui Province
- National Key Laboratory of Science and Technology on Materials under Shock and Impact
Zitieren
APA
Chen, Y., Fu, Y., Jia, X., Li, K., & Wang, C. (2025). Femtosecond Laser Single-Spot Welding of Sapphire/Invar Alloy. Materials, 18(16), 3839. https://doi.org/10.3390/ma18163839
Vancouver
Chen Y, Fu Y, Jia X, Li K, Wang C. Femtosecond Laser Single-Spot Welding of Sapphire/Invar Alloy. Materials. 2025;18(16):3839. doi:10.3390/ma18163839
BibTeX
@article{Chen2025,
author = {Chen, Yuyang and Fu, Yinzhi and Jia, Xianshi and Li, Kai and Wang, Cong},
title = {Femtosecond Laser Single-Spot Welding of Sapphire/Invar Alloy},
journal = {Materials},
year = {2025},
volume = {18},
number = {16},
pages = {3839},
doi = {10.3390/ma18163839}
}
EUVIMED