The Influence of Rolling Direction and Dynamic Strengthening on the Properties of Steel
Materials · 13.08.2025 · 18 (16) · 3808
DOI: 10.3390/ma18163808 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 13.08.2025. Verfasst von Jakub Pokropek und 8 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Robots & Machine Design, Faculty of Mechanical Engineering, Military University of Technology, 2 Gen. S. Kaliskiego St., 00-908 Warsaw, …. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Military University of Technology in Warsaw, Military University of Technology.
Abstract (Originalsprache)
The article presents an analysis of the mechanical properties of S700MC steel, which represents advanced low-alloy high-strength steels. The influence of microstructure, shaped by a controlled thermo-mechanical rolling process, on the strength, ductility, and resistance to cracking and fatigue of the material is discussed. Particular attention is paid to the anisotropy of mechanical properties resulting from the orientation relative to the rolling direction, manifested by variations in yield strength, tensile strength, and total elongation of the specimens. The analysis also includes the material’s behavior under dynamic conditions, where the steel’s strength increases with the strain rate. Experimental investigations conducted using the digital image correlation (DIC) method enabled a detailed assessment of local strains and fracture characteristics of specimens subjected to both static and dynamic testing. The results showed that specimens cut along the rolling direction exhibited, on average, 6.4% higher tensile strength and 6.8% higher yield strength compared to those cut transversely. Moreover, dynamic loading led to an increase in load-bearing capacity of over 10% compared to static tests. The obtained data are highly relevant from the perspective of structural design, where the selection of material orientation and the consideration of strain rate effects are crucial for ensuring the reliability of components made from S700MC steel.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Robots & Machine Design, Faculty of Mechanical Engineering, Military University of Technology, 2 Gen. S. Kaliskiego St., 00-908 Warsaw, Poland.
- Department of Mechanical Engineering, Faculty of Military Technology, University of Defence, 662 10 Brno, Czech Republic.
- Faculty of Civil Engineering and Geodesy, Military University of Technology, 2 Gen. S. Kaliskiego St., 00-908 Warsaw, Poland.
ORCID-Profile: Janusz Kluczyński, Bartłomiej Sarzyński, Katarzyna Jasik, Ireneusz Szachogłuchowicz, Jakub Łuszczek, Zdeněk Joska, Marcin Małek, Janusz Torzewski
Förderung
- Military University of Technology in Warsaw
- Military University of Technology
Zitieren
APA
Pokropek, J., Kluczyński, J., Sarzyński, B., Jasik, K., Szachogłuchowicz, I., Łuszczek, J., Joska, Z., Małek, M., & Torzewski, J. (2025). The Influence of Rolling Direction and Dynamic Strengthening on the Properties of Steel. Materials, 18(16), 3808. https://doi.org/10.3390/ma18163808
Vancouver
Pokropek J, Kluczyński J, Sarzyński B, Jasik K, Szachogłuchowicz I, Łuszczek J, et al. The Influence of Rolling Direction and Dynamic Strengthening on the Properties of Steel. Materials. 2025;18(16):3808. doi:10.3390/ma18163808
BibTeX
@article{Pokropek2025,
author = {Pokropek, Jakub and Kluczyński, Janusz and Sarzyński, Bartłomiej and Jasik, Katarzyna and Szachogłuchowicz, Ireneusz and Łuszczek, Jakub and Joska, Zdeněk and Małek, Marcin and Torzewski, Janusz},
title = {The Influence of Rolling Direction and Dynamic Strengthening on the Properties of Steel},
journal = {Materials},
year = {2025},
volume = {18},
number = {16},
pages = {3808},
doi = {10.3390/ma18163808}
}
EUVIMED