Mix Design Optimization of Coal Gangue-Based Geopolymer Foamed Concrete Using Response Surface Methodology
Materials · 13.08.2025 · 18 (16) · 3801
DOI: 10.3390/ma18163801 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 13.08.2025. Verfasst von Dan Wang und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Architectural Engineering, Hulunbuir University, Hulunbuir 021008, China. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Hulunbuir University, Inner Mongolia Autonomous Region Science and Technology Plan Project, the 2023 Hulun Buir City Key Project.
Abstract (Originalsprache)
This study develops a novel geopolymer foamed concrete using coal gangue and slag as precursors, along with a composite alkali activator comprising sodium silicate and sodium hydroxide, based on the physical foaming method. The Box–Behnken Design within Response Surface Methodology was applied to optimize the mix proportions of coal gangue–slag-based geopolymer foamed concrete. The effects of alkali activator dosage, sodium silicate modulus, water-to-binder ratio, and foam content on 28-day compressive strength and thermal conductivity were systematically investigated to determine the optimal mix for achieving a balance between mechanical and thermal performance. Scanning Electron Microscopy and other characterization techniques were used to analyze the microstructural features. The results show that foam content has the most significant influence on both mechanical and thermal performance, while the interaction between sodium silicate modulus and foam content exhibits the most pronounced combined effect. The optimized mix design consists of 9.1% alkali activator dosage, a sodium silicate modulus of 1.07, a water-to-binder ratio of 0.44, and foam content of 50%, resulting in a 28-day compressive strength of 2.30 MPa and thermal conductivity of 0.0781 W/(m·K). The observed performance enhancement is primarily attributed to the increased heterogeneity in the pore structure. This study provides theoretical and technical support for the development of integrated thermal insulation and load-bearing wall materials suitable for severely cold regions.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Architectural Engineering, Hulunbuir University, Hulunbuir 021008, China.
- School of Civil Engineering, Inner Mongolia University of Science and Technology, Baotou 014010, China.
- Engineering Research Center of Safe Mining and Comprehensive Utilization of Mineral Resources of Inner Mongolia Autonomous Region Universities, Hulunbuir 021008, China.
- School of Civil Engineering, Harbin Institute of Technology, Harbin 150001, China.
Förderung
- Hulunbuir University
- Inner Mongolia Autonomous Region Science and Technology Plan Project
- the 2023 Hulun Buir City Key Project
- the 2022 Inner Mongolia Higher Education Research Project
- the 2023 Hulun Buir University Platform Research Project
Zitieren
APA
Wang, D., Shan, W., Li, R., Song, Z., & Guo, L. (2025). Mix Design Optimization of Coal Gangue-Based Geopolymer Foamed Concrete Using Response Surface Methodology. Materials, 18(16), 3801. https://doi.org/10.3390/ma18163801
Vancouver
Wang D, Shan W, Li R, Song Z, Guo L. Mix Design Optimization of Coal Gangue-Based Geopolymer Foamed Concrete Using Response Surface Methodology. Materials. 2025;18(16):3801. doi:10.3390/ma18163801
BibTeX
@article{Wang2025,
author = {Wang, Dan and Shan, Wendong and Li, Rongjie and Song, Zhiqiang and Guo, Lanhui},
title = {Mix Design Optimization of Coal Gangue-Based Geopolymer Foamed Concrete Using Response Surface Methodology},
journal = {Materials},
year = {2025},
volume = {18},
number = {16},
pages = {3801},
doi = {10.3390/ma18163801}
}
EUVIMED