EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Polishing of AISI 304 SS by Electrolytic Plasma in Aqueous Urea Solution: Effect on Surface Modification and Corrosion Resistance

Hugo Pérez-Durán, Francisco Martínez-Baltodano iD, Gregorio Vargas-Gutiérrez

Materials · 12.08.2025 · 18 (16) · 3786

DOI: 10.3390/ma18163786 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 12.08.2025. Verfasst von Hugo Pérez-Durán und 2 weiteren Autor:innen. Beteiligte Einrichtung: Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional, Unidad Saltillo, Ramos Arizpe 25900, Mexico. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Secretaria de Ciencia, Humanidades, Tecnología e Innovación, Secretaría de Ciencia, Humanidades, Tecnología e Innovación.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Plasma Electrolytic Polishing (PEP) is an advanced anodic process that enhances stainless steel surfaces through controlled electrochemical dissolution and plasma-mediated modification. This study demonstrates that PEP treatment of AISI 304 SS at 300 V in aqueous urea solution (3.0 wt.%)/NH4NO3 (0.25 wt.%) achieves remarkable improvements: surface roughness decreases by 54.6% (from 0.197 ± 0.023 μm to 0.0895 ± 0.0205 μm) with minimal mass loss (0.0035 g·cm−2) in just 20 min. Tafel analysis showed a 99% reduction in corrosion rate (0.00497 mm yr−1) compared to untreated AISI 304 SS (0.094 mm yr−1). Cyclic Potentiodynamic Polarization (CPDP) measurements indicated superior pitting resistance (Epit = +0.423 vs. +0.486 V for PEP processing). XPS analysis elucidates the underlying mechanisms, showing a 91% increase in the Cr/Fe ratio (0.44 to 0.84) and complete transformation of surface oxides to protective Cr2O3 (57.34 wt.%) and Fe3O4 (55.88 wt.%), which collectively explain the enhanced corrosion resistance.

Schlagwörter

Stichwörter der Autor:innen

304 stainless steelcomplex oxideselectropolishingplasma treatment of materialssurface treatment

Autor:innen und Institutionen

  • Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional, Unidad Saltillo, Ramos Arizpe 25900, Mexico.

ORCID-Profile: Francisco Martínez-Baltodano

Förderung

  • Secretaria de Ciencia, Humanidades, Tecnología e Innovación
  • Secretaría de Ciencia, Humanidades, Tecnología e Innovación

Zitieren

APA

Pérez-Durán, H., Martínez-Baltodano, F., & Vargas-Gutiérrez, G. (2025). Polishing of AISI 304 SS by Electrolytic Plasma in Aqueous Urea Solution: Effect on Surface Modification and Corrosion Resistance. Materials, 18(16), 3786. https://doi.org/10.3390/ma18163786

Vancouver

Pérez-Durán H, Martínez-Baltodano F, Vargas-Gutiérrez G. Polishing of AISI 304 SS by Electrolytic Plasma in Aqueous Urea Solution: Effect on Surface Modification and Corrosion Resistance. Materials. 2025;18(16):3786. doi:10.3390/ma18163786

BibTeX
@article{PrezDurn2025,
  author = {Pérez-Durán, Hugo and Martínez-Baltodano, Francisco and Vargas-Gutiérrez, Gregorio},
  title = {Polishing of AISI 304 SS by Electrolytic Plasma in Aqueous Urea Solution: Effect on Surface Modification and Corrosion Resistance},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {16},
  pages = {3786},
  doi = {10.3390/ma18163786}
}
Kostenlos starten →