Modification of Thermo-Chemical Properties of Hot-Pressed ZrB2-HfB2 Composites by Incorporation of Carbides (SiC, B4C, and WC) or Silicides (MoSi2 and CrSi2) Additives
Materials · 11.08.2025 · 18 (16) · 3761
DOI: 10.3390/ma18163761 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 11.08.2025. Verfasst von Agnieszka Gubernat und 9 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Materials Science and Ceramics, AGH University of Krakow, al. Adama Mickiewicza 30, 30-059 Kraków, Poland. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: AGH University of Krakow, “Excellence Initiative—Research University”, the AGH University of Krakow.
Abstract (Originalsprache)
ZrB2-HfB2 composites allow us to obtain materials characterized by the high chemical resistance characteristic of HfB2 while reducing density and improving sinterability due to the presence of ZrB2. Since boride composites are difficult-to-sinter materials. One way to achieve high density during sintering is to add phases that activate mass transport processes and, after sintering, remain as composite components that do not degrade and even improve some properties of the borides. The following paper is a comprehensive review of the effects of various and the most commonly used sintering aids, i.e., SiC, B4C, WC, MoSi2, and CrSi2, on the thermo-chemical properties of the ZrB2-HfB2 composites. High-density composites with a complex phase composition dominated by (Zr,Hf)B2 solid solutions were obtained using a hot pressing method. The tests showed differences in the properties of the composites due to the type of sintering additives used. From the point of view of the thermo-chemical properties, the best additive was silicon carbide. The composites containing SiC, when compared to the initial, pure borides, were characterized by high thermal conductivity λ (80–150 W/m·K at 20–1000 °C), a significantly reduced thermal expansion coefficient (CTE ~6.20 × 10−6 1/K at 20–1000 °C), and considerably improved oxidation resistance (up to 1400 °C).
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Materials Science and Ceramics, AGH University of Krakow, al. Adama Mickiewicza 30, 30-059 Kraków, Poland.
- Institute of Materials Research, Slovak Academy of Sciences, 47 Watsonova St., 040 01 Košice, Slovakia.
- Science and Technology on Thermostructural Composite Materials Laboratory, Northwestern Polytechnical University, Xi'an 710072, China.
ORCID-Profile: Agnieszka Gubernat, Dariusz Zientara, Łukasz Zych, Paweł Rutkowski, Sebastian Komarek, Annamaria Naughton-Duszova, Leszek Chlubny, Zbigniew Pędzich
Förderung
- AGH University of Krakow
- “Excellence Initiative—Research University”, the AGH University of Krakow
Zitieren
APA
Gubernat, A., Kornaus, K., Zientara, D., Zych, Ł., Rutkowski, P., Komarek, S., Naughton-Duszova, A., Liu, Y., Chlubny, L., & Pędzich, Z. (2025). Modification of Thermo-Chemical Properties of Hot-Pressed ZrB2-HfB2 Composites by Incorporation of Carbides (SiC, B4C, and WC) or Silicides (MoSi2 and CrSi2) Additives. Materials, 18(16), 3761. https://doi.org/10.3390/ma18163761
Vancouver
Gubernat A, Kornaus K, Zientara D, Zych Ł, Rutkowski P, Komarek S, et al. Modification of Thermo-Chemical Properties of Hot-Pressed ZrB2-HfB2 Composites by Incorporation of Carbides (SiC, B4C, and WC) or Silicides (MoSi2 and CrSi2) Additives. Materials. 2025;18(16):3761. doi:10.3390/ma18163761
BibTeX
@article{Gubernat2025,
author = {Gubernat, Agnieszka and Kornaus, Kamil and Zientara, Dariusz and Zych, Łukasz and Rutkowski, Paweł and Komarek, Sebastian and Naughton-Duszova, Annamaria and Liu, Yongsheng and Chlubny, Leszek and Pędzich, Zbigniew},
title = {Modification of Thermo-Chemical Properties of Hot-Pressed ZrB2-HfB2 Composites by Incorporation of Carbides (SiC, B4C, and WC) or Silicides (MoSi2 and CrSi2) Additives},
journal = {Materials},
year = {2025},
volume = {18},
number = {16},
pages = {3761},
doi = {10.3390/ma18163761}
}
EUVIMED