EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Modeling, Simulation, and Techno-Economic Assessment of a Spent Li-Ion Battery Recycling Plant

Árpád Imre-Lucaci iD, Florica Imre-Lucaci, Szabolcs Fogarasi iD

Materials · 07.08.2025 · 18 (15) · 3715

DOI: 10.3390/ma18153715 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 07.08.2025. Verfasst von Árpád Imre-Lucaci und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering, Faculty of Chemistry and Chemical Engineering, Babeş-Bolyai University, RO-400028 Cluj Napoca, Romania. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: This work was supported by a grant of the Ministry of Research, Innovation and Digitization, CNCS/CCCDI - UEFISCDI, Ministry of Research, Innovation and Digitization, CNCS/CCCDI-UEFISCDI.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The literature clearly indicates that both academia and industry are strongly committed to developing comprehensive processes for spent Li-ion battery (LIB) recycling. In this regard, the current study presents an original contribution by providing a quantitative assessment of a large-scale recycling plant designed for the treatment of completely spent LIBs. In addition to a concept of the basic process, this assessment also considers a case study of a thermal integration and CO2 capture subsystem. Process flow modeling software was used to evaluate the contribution of all process steps and equipment to overall energy consumption and to mass balance the data required for the technical assessment of the large-scale recycling plant. To underline the advantages and identify the optimal novel process concept, several key performance indicators were determined, such as recovery efficiency, specific energy/material consumption, and specific CO2 emissions. In addition, the economic potential of the recycling plants was evaluated for the defined case studies based on capital and O&M costs. The results indicate that, even with CO2 capture applied, the thermally integrated process with the combustion of hydrogen produced in the recycling plant remains the most promising large-scale configuration for spent LIB recycling.

Schlagwörter

Stichwörter der Autor:innen

metal recoverymodelingrecyclingsimulationspent li-ion batteries

Autor:innen und Institutionen

  • Department of Chemical Engineering, Faculty of Chemistry and Chemical Engineering, Babeş-Bolyai University, RO-400028 Cluj Napoca, Romania.
  • Institute for Interdisciplinary Research in Bio-Nano-Science, Babeş-Bolyai University, RO-400271 Cluj Napoca, Romania.

ORCID-Profile: Árpád Imre-Lucaci, Szabolcs Fogarasi

Förderung

  • This work was supported by a grant of the Ministry of Research, Innovation and Digitization, CNCS/CCCDI - UEFISCDI
  • Ministry of Research, Innovation and Digitization, CNCS/CCCDI-UEFISCDI

Zitieren

APA

Imre-Lucaci, Á., Imre-Lucaci, F., & Fogarasi, S. (2025). Modeling, Simulation, and Techno-Economic Assessment of a Spent Li-Ion Battery Recycling Plant. Materials, 18(15), 3715. https://doi.org/10.3390/ma18153715

Vancouver

Imre-Lucaci Á, Imre-Lucaci F, Fogarasi S. Modeling, Simulation, and Techno-Economic Assessment of a Spent Li-Ion Battery Recycling Plant. Materials. 2025;18(15):3715. doi:10.3390/ma18153715

BibTeX
@article{ImreLucaci2025,
  author = {Imre-Lucaci, Árpád and Imre-Lucaci, Florica and Fogarasi, Szabolcs},
  title = {Modeling, Simulation, and Techno-Economic Assessment of a Spent Li-Ion Battery Recycling Plant},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {15},
  pages = {3715},
  doi = {10.3390/ma18153715}
}
Kostenlos starten →