EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study on the Wear Performance of 20CrMnTi Gear Steel with Different Penetration Gradient Positions

Yingtao Zhang, Shaokui Wei, Wuxin Yang, Jiajian Guan, Gong Li iD

Materials · 06.08.2025 · 18 (15) · 3685

DOI: 10.3390/ma18153685 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 06.08.2025. Verfasst von Yingtao Zhang und 4 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical & Electrical Engineering, Hohai University, Changzhou 213200, China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, National Key Research and Development Program of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the wear performance of 20CrMnTi steel, a commonly used material for spiral bevel gears, after heat treatment, with a focus on the microstructural evolution and wear behavior in both the surface and gradient direction of the carburized layer. The results show that the microstructure composition in the gradient direction of the carburized layer gradually transitions from martensite and residual austenite to a martensite–bainite mixed structure, and eventually transforms to fully bainitic in the matrix. With the extension of carburizing time, both the effective carburized layer depth and the hardened layer depth significantly increase. Wear track morphology analysis reveals that the wear track depth gradually becomes shallower and narrower, and the wear rate increases significantly with increasing load. However, the friction coefficient shows little sensitivity to changes in carburizing time and load. Further investigations show that as the carburized layer depth increases, the carbon concentration and hardness of the samples gradually decrease, resulting in an increase in the average wear rate and a progressive worsening of wear severity. After the wear tests, different depths of plowing grooves, spalling, and fish-scale-like features were observed in the wear regions. Additionally, with the increase in load and carburized layer depth, both the width and depth of the wear tracks significantly increased. The research results provide a theoretical basis for optimizing the surface carburizing process of 20CrMnTi steel and improving its wear resistance.

Schlagwörter

Stichwörter der Autor:innen

20CrMnTicarbon concentrationhardnessheat treatmentwear properties

Autor:innen und Institutionen

  • College of Mechanical & Electrical Engineering, Hohai University, Changzhou 213200, China.
  • Department of Chemical and Materials Engineering, University of Auckland, Auckland 1010, New Zealand.
  • State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004, China.

ORCID-Profile: Gong Li

Förderung

  • National Natural Science Foundation of China
  • National Key Research and Development Program of China

Zitieren

APA

Zhang, Y., Wei, S., Yang, W., Guan, J., & Li, G. (2025). Study on the Wear Performance of 20CrMnTi Gear Steel with Different Penetration Gradient Positions. Materials, 18(15), 3685. https://doi.org/10.3390/ma18153685

Vancouver

Zhang Y, Wei S, Yang W, Guan J, Li G. Study on the Wear Performance of 20CrMnTi Gear Steel with Different Penetration Gradient Positions. Materials. 2025;18(15):3685. doi:10.3390/ma18153685

BibTeX
@article{Zhang2025,
  author = {Zhang, Yingtao and Wei, Shaokui and Yang, Wuxin and Guan, Jiajian and Li, Gong},
  title = {Study on the Wear Performance of 20CrMnTi Gear Steel with Different Penetration Gradient Positions},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {15},
  pages = {3685},
  doi = {10.3390/ma18153685}
}
Kostenlos starten →