Lithium Slag as a Supplementary Cementitious Material for Sustainable Concrete: A Review
Materials · 02.08.2025 · 18 (15) · 3641
DOI: 10.3390/ma18153641 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 02.08.2025. Verfasst von Sajad Razzazan und 2 weiteren Autor:innen. Beteiligte Einrichtung: Mineral Recovery Research Centre (MRRC), School of Engineering, Edith Cowan University, Joondalup, WA 6027, Australia. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The global cement industry remains a significant contributor to carbon dioxide (CO2) emissions, prompting substantial research efforts toward sustainable construction materials. Lithium slag (LS), a by-product of lithium extraction, has attracted attention as a supplementary cementitious material (SCM). This review synthesizes experimental findings on LS replacement levels, fresh-state behavior, mechanical performance (compressive, tensile, and flexural strengths), time-dependent deformation (shrinkage and creep), and durability (sulfate, acid, abrasion, and thermal) of LS-modified concretes. Statistical analysis identifies an optimal LS dosage of 20–30% (average 24%) for maximizing compressive strength and long-term durability, with 40% as a practical upper limit for tensile and flexural performance. Fresh-state tests show that workability losses at high LS content can be mitigated via superplasticizers. Drying shrinkage and creep strains decrease in a dose-dependent manner with up to 30% LS. High-volume (40%) LS blends achieve up to an 18% gain in 180-day compressive strength and >30% reduction in permeability metrics. Under elevated temperatures, 20% LS mixes retain up to 50% more residual strength than controls. In advanced systems—autoclaved aerated concrete (AAC), one-part geopolymers, and recycled aggregate composites—LS further enhances both microstructural densification and durability. In particular, LS emerges as a versatile SCM that optimizes mechanical and durability performance, supports material circularity, and reduces the carbon footprint.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Mineral Recovery Research Centre (MRRC), School of Engineering, Edith Cowan University, Joondalup, WA 6027, Australia.
ORCID-Profile: Nuha S Mashaan, Themelina Paraskeva
Zitieren
APA
Razzazan, S., Mashaan, N. S., & Paraskeva, T. (2025). Lithium Slag as a Supplementary Cementitious Material for Sustainable Concrete: A Review. Materials, 18(15), 3641. https://doi.org/10.3390/ma18153641
Vancouver
Razzazan S, Mashaan NS, Paraskeva T. Lithium Slag as a Supplementary Cementitious Material for Sustainable Concrete: A Review. Materials. 2025;18(15):3641. doi:10.3390/ma18153641
BibTeX
@article{Razzazan2025,
author = {Razzazan, Sajad and Mashaan, Nuha S and Paraskeva, Themelina},
title = {Lithium Slag as a Supplementary Cementitious Material for Sustainable Concrete: A Review},
journal = {Materials},
year = {2025},
volume = {18},
number = {15},
pages = {3641},
doi = {10.3390/ma18153641}
}
EUVIMED