Hybrid Laser Cleaning of Carbon Deposits on N52B30 Engine Piston Crowns: Multi-Objective Optimization via Response Surface Methodology
Materials · 01.08.2025 · 18 (15) · 3626
DOI: 10.3390/ma18153626 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 01.08.2025. Verfasst von Yishun Su und 7 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou 310023, China. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Zhejiang Provincial "Pioneer" Research and Development Program, Longyou County Science and Technology Program, The National Key Research and Development Program of China.
Abstract (Originalsprache)
Carbon deposits on the crown of engine pistons can markedly reduce combustion efficiency and shorten service life. Conventional cleaning techniques often fail to simultaneously ensure a high carbon removal efficiency and maintain optimal surface integrity. To enable efficient and precise carbon removal, this study proposes the application of hybrid laser cleaning—combining continuous-wave (CW) and pulsed lasers—to piston carbon deposit removal, and employs response surface methodology (RSM) for multi-objective process optimization. Using the N52B30 engine piston as the experimental substrate, this study systematically investigates the combined effects of key process parameters—including CW laser power, pulsed laser power, cleaning speed, and pulse repetition frequency—on surface roughness (Sa) and carbon residue rate (RC). Plackett–Burman design was employed to identify significant factors, the method of the steepest ascent was utilized to approximate the optimal region, and a quadratic regression model was constructed using Box–Behnken response surface methodology. The results reveal that the Y-direction cleaning speed and pulsed laser power exert the most pronounced influence on surface roughness (F-values of 112.58 and 34.85, respectively), whereas CW laser power has the strongest effect on the carbon residue rate (F-value of 57.74). The optimized process parameters are as follows: CW laser power set at 625.8 W, pulsed laser power at 250.08 W, Y-direction cleaning speed of 15.00 mm/s, and pulse repetition frequency of 31.54 kHz. Under these conditions, the surface roughness (Sa) is reduced to 0.947 μm, and the carbon residue rate (RC) is lowered to 3.67%, thereby satisfying the service performance requirements for engine pistons. This study offers technical insights into the precise control of the hybrid laser cleaning process and its practical application in engine maintenance and the remanufacturing of end-of-life components.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou 310023, China.
- Automobile School, Zhejiang Institute of Communications, Hangzhou 311112, China.
- Institute of Laser Advanced Manufacturing, Zhejiang University of Technology, Hangzhou 310023, China.
- DITT Hangzhou Digital Technology Co., Ltd., Hangzhou 310020, China.
- Hangzhou CRRC Vehicle Co., Ltd., Hangzhou 311223, China.
ORCID-Profile: Zhehe Yao, Qunli Zhang
Förderung
- Zhejiang Provincial "Pioneer" Research and Development Program
- Longyou County Science and Technology Program
- The National Key Research and Development Program of China
- National Key Research and Development Program of China
- Zhejiang Provincial “Pioneer” Research and Development Program
Zitieren
APA
Su, Y., Wang, L., Yao, Z., Zhang, Q., Chen, Z., Duan, J., Ye, T., & Yao, J. (2025). Hybrid Laser Cleaning of Carbon Deposits on N52B30 Engine Piston Crowns: Multi-Objective Optimization via Response Surface Methodology. Materials, 18(15), 3626. https://doi.org/10.3390/ma18153626
Vancouver
Su Y, Wang L, Yao Z, Zhang Q, Chen Z, Duan J, et al. Hybrid Laser Cleaning of Carbon Deposits on N52B30 Engine Piston Crowns: Multi-Objective Optimization via Response Surface Methodology. Materials. 2025;18(15):3626. doi:10.3390/ma18153626
BibTeX
@article{Su2025,
author = {Su, Yishun and Wang, Liang and Yao, Zhehe and Zhang, Qunli and Chen, Zhijun and Duan, Jiawei and Ye, Tingqing and Yao, Jianhua},
title = {Hybrid Laser Cleaning of Carbon Deposits on N52B30 Engine Piston Crowns: Multi-Objective Optimization via Response Surface Methodology},
journal = {Materials},
year = {2025},
volume = {18},
number = {15},
pages = {3626},
doi = {10.3390/ma18153626}
}
EUVIMED