Extraction of Corrosion Damage Features of Serviced Cable Based on Three-Dimensional Point Cloud Technology
Materials · 31.07.2025 · 18 (15) · 3611
DOI: 10.3390/ma18153611 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 31.07.2025. Verfasst von Tong Zhu und 4 weiteren Autor:innen. Beteiligte Einrichtung: Research Institute of Highway, Ministry of Transport, Beijing 100088, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangxi Science and Technology Program, Fundamental Research Funds for the Central Public-interest Scientific Institution.
Abstract (Originalsprache)
The corrosion of high-strength steel wires is a key factor impacting the durability and reliability of cable-stayed bridges. In this study, the corrosion pit features on a high-strength steel wire, which had been in service for 27 years, were extracted and modeled using three-dimensional point cloud data obtained through 3D surface scanning. The Otsu method was applied for image binarization, and each corrosion pit was geometrically represented as an ellipse. Key pit parameters—including length, width, depth, aspect ratio, and a defect parameter—were statistically analyzed. Results of the Kolmogorov–Smirnov (K–S) test at a 95% confidence level indicated that the directional angle component (θ) did not conform to any known probability distribution. In contrast, the pit width (b) and defect parameter (Φ) followed a generalized extreme value distribution, the aspect ratio (b/a) matched a Beta distribution, and both the pit length (a) and depth (d) were best described by a Gaussian mixture model. The obtained results provide valuable reference for assessing the stress state, in-service performance, and predicted remaining service life of operational stay cables.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Research Institute of Highway, Ministry of Transport, Beijing 100088, China.
- Faculty of EAE, Anglia Ruskin University, Peterborough PE1 5BW, UK.
- College of Civil Engineering and Architecture, Hebei University, Baoding 071002, China.
Förderung
- Guangxi Science and Technology Program
- Fundamental Research Funds for the Central Public-interest Scientific Institution
Zitieren
APA
Zhu, T., Cheng, S., He, H., Feng, K., & Zhu, J. (2025). Extraction of Corrosion Damage Features of Serviced Cable Based on Three-Dimensional Point Cloud Technology. Materials, 18(15), 3611. https://doi.org/10.3390/ma18153611
Vancouver
Zhu T, Cheng S, He H, Feng K, Zhu J. Extraction of Corrosion Damage Features of Serviced Cable Based on Three-Dimensional Point Cloud Technology. Materials. 2025;18(15):3611. doi:10.3390/ma18153611
BibTeX
@article{Zhu2025,
author = {Zhu, Tong and Cheng, Shoushan and He, Haifang and Feng, Kun and Zhu, Jinran},
title = {Extraction of Corrosion Damage Features of Serviced Cable Based on Three-Dimensional Point Cloud Technology},
journal = {Materials},
year = {2025},
volume = {18},
number = {15},
pages = {3611},
doi = {10.3390/ma18153611}
}
EUVIMED