Modeling and Optimization of MXene/PVC Membranes for Enhanced Water Treatment Performance
Materials · 25.07.2025 · 18 (15) · 3494
DOI: 10.3390/ma18153494 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 25.07.2025. Verfasst von Zainab E Alhadithy und 6 weiteren Autor:innen. Beteiligte Einrichtung: Oil and Gas Refining Engineering Department, Al Hikma University College, Baghdad 10052, Iraq. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
In this paper, MXene nanosheets were used as nano additives for the preparation of MXene-modified polyvinyl chloride (PVC) mixed max membranes (MMMs) for the rejection of lead (Pb2+) ions from wastewater. MXene nanosheets were introduced into the PVC matrix to enhance membrane performance, hydrophilicity, contact angle, porosity, and resistance to fouling. Modeling and optimization techniques were used to examine the effects of important operational and fabrication parameters, such as pH, contaminant concentration, nanoadditive (MXene) content, and operating pressure. Predictive models were developed using experimental data to assess the membranes’ performance in terms of flux and Pb2+ rejection. The ideal circumstances that struck a balance between long-term operating stability and high removal efficiency were found through multi-variable optimization. The optimized conditions for the best rejection of Pb2+ ions and the most stable permeability over time among the membranes that were manufactured were the initial metal ions concentration (2 mg/L), pH (7.89), pressure (2.99 bar), and MXene mass (0.3 g). The possibility of combining MXene nanoparticles with methodical optimization techniques to create efficient membranes for the removal of heavy metals in wastewater treatment applications is highlighted by this work.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Oil and Gas Refining Engineering Department, Al Hikma University College, Baghdad 10052, Iraq.
- Al Mussaib Technical College, Al-Furat Al-Awsat Technical University, Babylon P.O. Box 51006, Iraq.
- Membrane Technology Research Unit, Chemical Engineering Department, University of Technology, Al-Sinaa Street 52, Baghdad 10066, Iraq.
- Faculty of Chemical Engineering and Biotechnologies, National University of Science and Technology Politehnica Bucharest, 011061 Bucharest, Romania.
ORCID-Profile: Zainab E Alhadithy, Ali A Abbas Aljanabi, Adnan A AbdulRazak, Qusay F Alsalhy, Raluca Isopescu
Zitieren
APA
Alhadithy, Z. E., Aljanabi, A. A. A., AbdulRazak, A. A., Alsalhy, Q. F., Isopescu, R., Dinculescu, D., & Gîjiu, C. L. (2025). Modeling and Optimization of MXene/PVC Membranes for Enhanced Water Treatment Performance. Materials, 18(15), 3494. https://doi.org/10.3390/ma18153494
Vancouver
Alhadithy ZE, Aljanabi AAA, AbdulRazak AA, Alsalhy QF, Isopescu R, Dinculescu D, et al. Modeling and Optimization of MXene/PVC Membranes for Enhanced Water Treatment Performance. Materials. 2025;18(15):3494. doi:10.3390/ma18153494
BibTeX
@article{Alhadithy2025,
author = {Alhadithy, Zainab E and Aljanabi, Ali A Abbas and AbdulRazak, Adnan A and Alsalhy, Qusay F and Isopescu, Raluca and Dinculescu, Daniel and Gîjiu, Cristiana Luminița},
title = {Modeling and Optimization of MXene/PVC Membranes for Enhanced Water Treatment Performance},
journal = {Materials},
year = {2025},
volume = {18},
number = {15},
pages = {3494},
doi = {10.3390/ma18153494}
}
EUVIMED