EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Micromechanical Finite Element Model Investigation of Cracking Behavior and Construction-Related Deficiencies in Asphalt Mixtures

Liu Yang, Suwei Hou, Haibo Yu

Materials · 22.07.2025 · 18 (15) · 3426

DOI: 10.3390/ma18153426 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 22.07.2025. Verfasst von Liu Yang und 2 weiteren Autor:innen. Beteiligte Einrichtung: Zhengzhou Railway Vocational and Technical College, Zhengzhou 451460, China. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigated the fracture behavior of asphalt mixtures under indirect tensile loading by comparing the performance of homogenized and micromechanical finite element (FEMs) models based on the cohesive zone model (CZM). Five asphalt mixture types were tested experimentally, and both models were calibrated and validated using load–displacement curves from indirect tensile tests (IDTs). The micromechanical model, incorporating random aggregate generation and three-phase material definition, exhibited significantly higher predictive accuracy (R2 = 0.86–0.98) than the homogenized model (R2 = 0.66–0.77). The validated micromechanical model was further applied to quantify the impact of construction-related deficiencies—namely, increased air voids, non-continuous gradation, and aggregate segregation. The simulation results showed that higher void content (from 4% to 10%) reduced peak load by up to 35% and increased localized stress concentrations by up to 40%. Discontinuous gradation and uneven aggregate distribution also led to premature crack initiation and more complex fracture paths. These findings demonstrated the value of micromechanical modeling for evaluating sensitivity to mix design and compaction quality, providing a foundation for performance-based asphalt mixture optimization and durability improvement.

Schlagwörter

Stichwörter der Autor:innen

cohesive zone model (CZM)finite element simulationfracture mechanicsindirect tensile test (IDT)random aggregate generation

Autor:innen und Institutionen

  • Zhengzhou Railway Vocational and Technical College, Zhengzhou 451460, China.
  • Beijing University of Civil Engineering and Architecture, Beijing 102600, China.

Zitieren

APA

Yang, L., Hou, S., & Yu, H. (2025). Micromechanical Finite Element Model Investigation of Cracking Behavior and Construction-Related Deficiencies in Asphalt Mixtures. Materials, 18(15), 3426. https://doi.org/10.3390/ma18153426

Vancouver

Yang L, Hou S, Yu H. Micromechanical Finite Element Model Investigation of Cracking Behavior and Construction-Related Deficiencies in Asphalt Mixtures. Materials. 2025;18(15):3426. doi:10.3390/ma18153426

BibTeX
@article{Yang2025,
  author = {Yang, Liu and Hou, Suwei and Yu, Haibo},
  title = {Micromechanical Finite Element Model Investigation of Cracking Behavior and Construction-Related Deficiencies in Asphalt Mixtures},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {15},
  pages = {3426},
  doi = {10.3390/ma18153426}
}
Kostenlos starten →