EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental Investigation of Delayed Fracture Initiation in Advanced High-Strength Steel Under Accelerated Bending

Kyucheol Jeong, Jaewook Lee, Jonghun Yoon

Materials · 21.07.2025 · 18 (14) · 3415

DOI: 10.3390/ma18143415 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 21.07.2025. Verfasst von Kyucheol Jeong und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Hanyang University ERICA, 55 Hanyangdaehak-ro, Sangnok-gu, Ansan-si 15588, Republic of Korea. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Pohang Iron and Steel (South Korea), Ministry of Trade, Industry and Energy, Korea Institute for Advancement of Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Predicting bending fractures in advanced high-strength steel (AHSS) is challenging due to complex microstructural behaviors and strain rate dependencies, particularly in industrial forming processes. Current models and standards primarily focus on quasi-static tension or slow bending speeds, leaving a gap in understanding the accelerated failure of AHSS without necking. In this study, direct bending experiments were conducted on dual-phase, complex-phase, and martensitic AHSS grades under varying bending speeds and radii. Since the bending crack is irrelevant to the load drop, surface crack evolution was measured using three-dimensional surface profile analysis. The results showed that accelerated bending significantly delayed crack initiation across all tested materials, with small-radius bending showing reduced strain localization due to strain rate hardening. Larger-radius bending benefited primarily from increased fracture strain.

Schlagwörter

Stichwörter der Autor:innen

advanced high-strength steel (AHSS)bending failurerate-dependent fracturestrain rate

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Hanyang University ERICA, 55 Hanyangdaehak-ro, Sangnok-gu, Ansan-si 15588, Republic of Korea.
  • BK21 FOUR ERICA-ACE Center, Hanyang University, 55 Hanyangdaehak-ro, Sangnok-gu, Ansan-si 15588, Republic of Korea.
  • Materials Forming Research Group, POSCO Global R&D Center, 100 Songdogwahak-ro, Yeonsu-gu, Incheon 21985, Republic of Korea.

Förderung

  • Pohang Iron and Steel (South Korea)
  • Ministry of Trade, Industry and Energy
  • Korea Institute for Advancement of Technology
  • Materials Forming Research Group, POSCO
  • Ministry of Trade, Industry & Energy (MOTIE, Republic of Korea)

Zitieren

APA

Jeong, K., Lee, J., & Yoon, J. (2025). Experimental Investigation of Delayed Fracture Initiation in Advanced High-Strength Steel Under Accelerated Bending. Materials, 18(14), 3415. https://doi.org/10.3390/ma18143415

Vancouver

Jeong K, Lee J, Yoon J. Experimental Investigation of Delayed Fracture Initiation in Advanced High-Strength Steel Under Accelerated Bending. Materials. 2025;18(14):3415. doi:10.3390/ma18143415

BibTeX
@article{Jeong2025,
  author = {Jeong, Kyucheol and Lee, Jaewook and Yoon, Jonghun},
  title = {Experimental Investigation of Delayed Fracture Initiation in Advanced High-Strength Steel Under Accelerated Bending},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {14},
  pages = {3415},
  doi = {10.3390/ma18143415}
}
Kostenlos starten →