Cleaner Production of Metallurgical-Grade Iron from High-Iron Bauxite Residue via Smelting Reduction: Thermodynamic Control, Industrial Application Potential, and Slag Utilization Strategy
Materials · 11.07.2025 · 18 (14) · 3288
DOI: 10.3390/ma18143288 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 11.07.2025. Verfasst von Kun Wang und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Metallurgy, Northeastern University, Shenyang 110819, China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Guangxi Science and Technology Planning Project, Fundamental Research Funds for the Central Universities of China.
Abstract (Originalsprache)
Iron-rich bauxite residue (red mud) is a hazardous alkaline solid waste produced during the production of alumina from high-iron bauxite, which poses severe environmental challenges due to its massive stockpiling and limited utilization. In this study, metallic iron was recovered from high-iron red mud using the smelting reduction process. Thermodynamic analysis results show that an increase in temperature and sodium oxide content, along with an appropriate mass ratio of Al2O3 to SiO2 (A/S) and mass ratio of CaO to SiO2 (C/S), contribute to the enhancement of the liquid phase mass fraction of the slag. During the smelting reduction process of high-iron red mud, iron recoveries for low-alkali high-iron red mud and high-alkali high-iron red mud under optimal conditions were 98.14% and 98.36%, respectively. The metal obtained through reduction meets the industrial standard for steel-making pig iron, which is also confirmed in the pilot-scale experiment. The smelting reduction process of high-iron red mud can be divided into two stages, where the reaction is predominantly governed by interfacial chemical reaction and diffusion control, respectively. The apparent activation energy of high-alkali high-iron red mud is lower than that observed for low-alkali high-iron red mud. The reduced slag can be used as a roadside stone material or cement clinker. This proposed method represents a sustainable process for the comprehensive utilization of high-iron red mud, which also promotes the minimization of red mud.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Metallurgy, Northeastern University, Shenyang 110819, China.
- Key Laboratory of Ecological Metallurgy of Multi-Metal Intergrown Ores of Ministry of Education, Shenyang 110819, China.
ORCID-Profile: Ting-An Zhang, Yan Liu, Guo-Zhi Lv
Förderung
- National Natural Science Foundation of China
- Guangxi Science and Technology Planning Project
- Fundamental Research Funds for the Central Universities of China
- Liaoning Science and Technology Planning Project
Zitieren
APA
Wang, K., Zhang, T. A., Dou, Z. H., Liu, Y., & Lv, G. Z. (2025). Cleaner Production of Metallurgical-Grade Iron from High-Iron Bauxite Residue via Smelting Reduction: Thermodynamic Control, Industrial Application Potential, and Slag Utilization Strategy. Materials, 18(14), 3288. https://doi.org/10.3390/ma18143288
Vancouver
Wang K, Zhang TA, Dou ZH, Liu Y, Lv GZ. Cleaner Production of Metallurgical-Grade Iron from High-Iron Bauxite Residue via Smelting Reduction: Thermodynamic Control, Industrial Application Potential, and Slag Utilization Strategy. Materials. 2025;18(14):3288. doi:10.3390/ma18143288
BibTeX
@article{Wang2025,
author = {Wang, Kun and Zhang, Ting-An and Dou, Zhi-He and Liu, Yan and Lv, Guo-Zhi},
title = {Cleaner Production of Metallurgical-Grade Iron from High-Iron Bauxite Residue via Smelting Reduction: Thermodynamic Control, Industrial Application Potential, and Slag Utilization Strategy},
journal = {Materials},
year = {2025},
volume = {18},
number = {14},
pages = {3288},
doi = {10.3390/ma18143288}
}
EUVIMED