Characterization of Nano-Sized Features in Powder Bed Additively Manufactured Ti-6Al-4V Alloy
Materials · 07.07.2025 · 18 (13) · 3198
DOI: 10.3390/ma18133198 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 07.07.2025. Verfasst von Eyal Eshed und 1 weiteren Autor:innen. Beteiligte Einrichtung: Rafael Advanced Defense Systems Ltd., P.O. Box 2250, Haifa 3102102, Israel. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
In this study, we delve into the intricate microstructural features of Ti-6Al-4V alloy additively manufactured and heat-treated at 800 °C for 4 h. Our in-depth analysis will enable us to gain a better understanding of the β-Ti precipitation process, its dependence on temperature, and its ultimate effect on the overall mechanical properties. As well as α-Ti martensite grains and β-Ti particles interspersed in the α-Ti grain boundaries, there is a third microstructural feature, overlooked by many researchers. This feature is observed as nano-sized particles homogeneously embedded inside the α-Ti laths. Using high-resolution transmission electron microscopy, we reveal that these nano-sized features do not constitute a different phase. Instead, they define isolated regions of α-Ti in its relaxed form, surrounded by the heavily strained form of the α-Ti phase. This phenomenon is a result of the “incomplete” precipitation of the β-Ti phase following the heat treatment stage. The straining of the α-Ti phase appears as a shift in the equilibrium atomic position.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Rafael Advanced Defense Systems Ltd., P.O. Box 2250, Haifa 3102102, Israel.
- Faculty of Mechanical Engineering, Technion-Israel Institute of Technology, Haifa 3200003, Israel.
ORCID-Profile: Eyal Eshed, Amnon Shirizly
Zitieren
APA
Eshed, E., & Shirizly, A. (2025). Characterization of Nano-Sized Features in Powder Bed Additively Manufactured Ti-6Al-4V Alloy. Materials, 18(13), 3198. https://doi.org/10.3390/ma18133198
Vancouver
Eshed E, Shirizly A. Characterization of Nano-Sized Features in Powder Bed Additively Manufactured Ti-6Al-4V Alloy. Materials. 2025;18(13):3198. doi:10.3390/ma18133198
BibTeX
@article{Eshed2025,
author = {Eshed, Eyal and Shirizly, Amnon},
title = {Characterization of Nano-Sized Features in Powder Bed Additively Manufactured Ti-6Al-4V Alloy},
journal = {Materials},
year = {2025},
volume = {18},
number = {13},
pages = {3198},
doi = {10.3390/ma18133198}
}
EUVIMED