Recent Trends in Non-Destructive Testing Approaches for Composite Materials: A Review of Successful Implementations
Materials · 02.07.2025 · 18 (13) · 3146
DOI: 10.3390/ma18133146 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 02.07.2025. Verfasst von Jan Lean Tai und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Aerospace Engineering, Faculty of Engineering, Universiti Putra Malaysia, Serdang 43400, Selangor, Malaysia. Die Arbeit wurde bisher 53-mal zitiert (Crossref) und nennt 200 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Ministry of Higher Education Malaysia (MOHE) under the Higher Institution Centre of Excellence at the Institute of Tropical Forestry and Forest Products, the Minister of Science of Poland under the name Polish Metrology II Programme, the Ministry of Science and Higher Education of Poland with allocation to the Faculty of Mechanical Engineering, Bialystok University of Technology.
Abstract (Originalsprache)
Non-destructive testing (NDT) methods are critical for evaluating the structural integrity of and detecting defects in composite materials across industries such as aerospace and renewable energy. This review examines the recent trends and successful implementations of NDT approaches for composite materials, focusing on articles published between 2015 and 2025. A systematic literature review identified 120 relevant articles, highlighting techniques such as ultrasonic testing (UT), acoustic emission testing (AET), thermography (TR), radiographic testing (RT), eddy current testing (ECT), infrared thermography (IRT), X-ray computed tomography (XCT), and digital radiography testing (DRT). These methods effectively detect defects such as debonding, delamination, and voids in fiber-reinforced polymer (FRP) composites. The selection of NDT approaches depends on the material properties, defect types, and testing conditions. Although each technique has advantages and limitations, combining multiple NDT methods enhances the quality assessment of composite materials. This review provides insights into the capabilities and limitations of various NDT techniques and suggests future research directions for combining NDT methods to improve quality control in composite material manufacturing. Future trends include adopting multimodal NDT systems, integrating digital twin and Industry 4.0 technologies, utilizing embedded and wireless structural health monitoring, and applying artificial intelligence for automated defect interpretation. These advancements are promising for transforming NDT into an intelligent, predictive, and integrated quality assurance system.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Aerospace Engineering, Faculty of Engineering, Universiti Putra Malaysia, Serdang 43400, Selangor, Malaysia.
- Laboratory of Biocomposite Technology, Institute of Tropical Forestry and Forest Products (INTROP), Universiti Putra Malaysia, Serdang 43400, Selangor, Malaysia.
- Aerospace Malaysia Innovation Centre [944751-A], Prime Minister's Department, MIGHT Partnership Hub, Jalan Impact, Cyberjaya 63600, Selangor, Malaysia.
- Institute of Mechanical Engineering, Faculty of Mechanical Engineering, Bialystok University of Technology, Wiejska St. 45C, 15-351 Bialystok, Poland.
- Department of Production Engineering, Faculty of Mechanical Engineering, Lublin University of Technology, Nadbystrzycka St. 36, 20-618 Lublin, Poland.
- Institute of Technical Sciences and Aviation, The State University of Applied Sciences in Chełm, Pocztowa St. 54, 22-100 Chełm, Poland.
ORCID-Profile: Jan Lean Tai, Mohamed Thariq Hameed Sultan, Andrzej Łukaszewicz, Jerzy Józwik, Zbigniew Oksiuta, Farah Syazwani Shahar
Förderung
- the Ministry of Higher Education Malaysia (MOHE) under the Higher Institution Centre of Excellence at the Institute of Tropical Forestry and Forest Products
- the Minister of Science of Poland under the name Polish Metrology II Programme
- the Ministry of Science and Higher Education of Poland with allocation to the Faculty of Mechanical Engineering, Bialystok University of Technology
- The Ministry of Higher Education Malaysia (MOHE)
- Minister of Science of Poland
- Ministry of Science and Higher Education of Poland with allocation to the Faculty of Mechanical Engineering, Bialystok University of Technology
Zitieren
APA
Tai, J. L., Sultan, M. T. H., Łukaszewicz, A., Józwik, J., Oksiuta, Z., & Shahar, F. S. (2025). Recent Trends in Non-Destructive Testing Approaches for Composite Materials: A Review of Successful Implementations. Materials, 18(13), 3146. https://doi.org/10.3390/ma18133146
Vancouver
Tai JL, Sultan MTH, Łukaszewicz A, Józwik J, Oksiuta Z, Shahar FS. Recent Trends in Non-Destructive Testing Approaches for Composite Materials: A Review of Successful Implementations. Materials. 2025;18(13):3146. doi:10.3390/ma18133146
BibTeX
@article{Tai2025,
author = {Tai, Jan Lean and Sultan, Mohamed Thariq Hameed and Łukaszewicz, Andrzej and Józwik, Jerzy and Oksiuta, Zbigniew and Shahar, Farah Syazwani},
title = {Recent Trends in Non-Destructive Testing Approaches for Composite Materials: A Review of Successful Implementations},
journal = {Materials},
year = {2025},
volume = {18},
number = {13},
pages = {3146},
doi = {10.3390/ma18133146}
}
EUVIMED