EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Recrystallization and Second-Phase Precipitation in Nb-V Microalloyed Steels: A Thermal Simulation Study

Qilin Ma, Shubiao Yin iD, Chengjia Shang, Qingyou Liu, Ba Li, Shujun Jia iD

Materials · 27.06.2025 · 18 (13) · 3069

DOI: 10.3390/ma18133069 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 27.06.2025. Verfasst von Qilin Ma und 5 weiteren Autor:innen. Beteiligte Einrichtung: Central Iron and Steel Research Institute Co., Ltd., Beijing 100081, China. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the relationship between recrystallization behavior and second-phase precipitation in Nb-V microalloyed steel during the rough rolling stage through thermal simulation experiments. The effects of deformation amount and temperature on austenite recrystallization were analyzed, alongside thermodynamic and kinetic calculations to assess the influence of Nb-V microalloying on second-phase precipitation. The results show that both the deformation amount and temperature significantly affect recrystallization, with Nb-V steel exhibiting more pronounced grain refinement compared to Nb steel. Significant differences in the type, morphology, and size distribution of second-phase precipitates were observed, with Nb-V steel primarily precipitating (Nb, V)C, while Nb steel only precipitates NbC. The average size of second-phase particles in Nb-V steel (10.60 nm) is smaller and more uniformly dispersed than in Nb steel (33.85 nm). Thermodynamic and kinetic analyses indicate that Nb-V microalloying accelerates second-phase precipitation kinetics. Moreover, second-phase particles hinder grain-boundary motion during recrystallization, with their effect surpassing that of Nb and V solid-solution atoms. These findings enhance the understanding of Nb-V composites in refining austenite grain size and promoting second-phase precipitation, providing valuable insights into the design and processing of high-performance microalloyed steels.

Schlagwörter

Stichwörter der Autor:innen

Nb-V microalloyingprecipitation kineticsrecrystallization behaviorsecond-phase precipitationthermodynamic and kinetic calculations

Autor:innen und Institutionen

  • Central Iron and Steel Research Institute Co., Ltd., Beijing 100081, China.
  • Collaborative Innovation Center for Steel Commonality, University of Science and Technology Beijing, Beijing 100083, China.
  • Faculty of Metallurgical and Energy Engineering, Kunming University of Science and Technology, Kunming 650093, China.

ORCID-Profile: Shubiao Yin, Shujun Jia

Zitieren

APA

Ma, Q., Yin, S., Shang, C., Liu, Q., Li, B., & Jia, S. (2025). Recrystallization and Second-Phase Precipitation in Nb-V Microalloyed Steels: A Thermal Simulation Study. Materials, 18(13), 3069. https://doi.org/10.3390/ma18133069

Vancouver

Ma Q, Yin S, Shang C, Liu Q, Li B, Jia S. Recrystallization and Second-Phase Precipitation in Nb-V Microalloyed Steels: A Thermal Simulation Study. Materials. 2025;18(13):3069. doi:10.3390/ma18133069

BibTeX
@article{Ma2025,
  author = {Ma, Qilin and Yin, Shubiao and Shang, Chengjia and Liu, Qingyou and Li, Ba and Jia, Shujun},
  title = {Recrystallization and Second-Phase Precipitation in Nb-V Microalloyed Steels: A Thermal Simulation Study},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {13},
  pages = {3069},
  doi = {10.3390/ma18133069}
}
Kostenlos starten →