Experimental Study on Shear Performance of Longitudinal Joints in Prefabricated Invert Arch for Mountain Mining Method Tunnels
Materials · 26.06.2025 · 18 (13) · 3025
DOI: 10.3390/ma18133025 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 26.06.2025. Verfasst von Shiqian Zhang und 4 weiteren Autor:innen. Beteiligte Einrichtung: China Construction Eighth Engineering Division Co., Ltd., Shanghai 200112, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangxi Natural Science Foundation Project, Basic Research Capability Enhancement Project for Young and Middle-aged Teachers in Guangxi Universities, National Natural Science Foundation of China.
Abstract (Originalsprache)
In order to improve the efficiency of highway tunnel construction and ensure the construction quality, the design concept of a prefabricated inverted arch and partial cast-in-place lining of highway tunnels by a mining method is put forward. During the assembly of prefabricated tunnel invert arches, the longitudinal joints between adjacent invert sections were subjected to shear forces due to the combined effects of the invert’s self-weight and construction equipment loads. This study investigated the shear performance of these longitudinal joints under construction loads, with a particular focus on the influence of bolt-tightening torque. Three longitudinal joint specimens were designed and fabricated, varying the bolt-tightening torque as a key parameter, and subjected to shear tests. The failure modes, load–slip behavior, and shear capacity of the joints were analyzed in relation to the tightening torque of high-strength bolts. The results indicate that when the bolt-tightening torque was set to 50% and 70% of the standard torque, the upper bolts of the joint sheared off, while the threads of the lower bolts were damaged. When the torque reached the standard value, all bolts were sheared off. The ultimate shear capacity of the longitudinal joints increased with higher bolt-tightening torque, with the optimal torque range identified as 70% to 85% of the specified standard. Ultimately, a method of calculation for evaluating the shear-bearing capacity of inverted arch longitudinal joints was proposed, with computational outcomes demonstrating a conservative bias that aligns with structural safety requirements.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- China Construction Eighth Engineering Division Co., Ltd., Shanghai 200112, China.
- School of Civil Engineering and Architecture, Guangxi University of Science and Technology, Liuzhou 545006, China.
- College of Civil Engineering and Architecture, Guangxi University, Nanning 530004, China.
- Key Laboratory of Disaster Prevention and Structure Safety of the Ministry of Education, Guangxi University, Nanning 530004, China.
Förderung
- Guangxi Natural Science Foundation Project
- Basic Research Capability Enhancement Project for Young and Middle-aged Teachers in Guangxi Universities
- National Natural Science Foundation of China
- Technology Development Fund Project Guangxi key R & D plan project
- Department of Science and Technology of Guangxi Zhuang Autonomous Region
- Department of Education of Guangxi Zhuang Autonomous Region
Zitieren
APA
Zhang, S., Ma, M., Li, C., Ye, P., & Chen, Z. (2025). Experimental Study on Shear Performance of Longitudinal Joints in Prefabricated Invert Arch for Mountain Mining Method Tunnels. Materials, 18(13), 3025. https://doi.org/10.3390/ma18133025
Vancouver
Zhang S, Ma M, Li C, Ye P, Chen Z. Experimental Study on Shear Performance of Longitudinal Joints in Prefabricated Invert Arch for Mountain Mining Method Tunnels. Materials. 2025;18(13):3025. doi:10.3390/ma18133025
BibTeX
@article{Zhang2025,
author = {Zhang, Shiqian and Ma, Minglei and Li, Chang and Ye, Peihuan and Chen, Zongping},
title = {Experimental Study on Shear Performance of Longitudinal Joints in Prefabricated Invert Arch for Mountain Mining Method Tunnels},
journal = {Materials},
year = {2025},
volume = {18},
number = {13},
pages = {3025},
doi = {10.3390/ma18133025}
}
EUVIMED