EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development of Constitutive Relationship for Thermomechanical Processing of FeCrAl Alloy to Predict Hot Deformation Behavior

Chuan Li, Shuang Chen, Shiyu Du, Juhong Yu, Yiming Zhang

Materials · 25.06.2025 · 18 (13) · 3007

DOI: 10.3390/ma18133007 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 25.06.2025. Verfasst von Chuan Li und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical and Electrical Engineering, Jiangxi University of Science and Technology, Ganzhou 341000, China. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The Key R & D Projects of Zhejiang Province, The Ningbo Major Research and Development Plan Project, National Natural Science Foundation of China, the project of the key technology for virtue reactors from NPIC.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Numerical simulation is a vital tool in the development of FeCrAl alloy cladding tubes, with its reliability closely tied to the predictive accuracy of the thermal deformation constitutive model used. In this study, hot compression tests on 0Cr23Al5 alloy were conducted using a Gleeble-3800 thermal compression testing machine (Dynamic Systems Inc., located in Albany, NY, USA), across a temperature range of 850–1050 °C and a strain rate range of 0.1–10 s−1. Based on the data obtained, both the Arrhenius constitutive model and the artificial neural network (ANN) model were developed. The ANN model demonstrated significantly superior predictive accuracy, with an average absolute relative error (AARE) of only 0.70% and a root mean square error (RMSE) of 1.99 MPa, compared to the Arrhenius model (AARE of 4.30% and RMSE of 14.47 MPa). Further validation via the VUHARD user subroutine in ABAQUS revealed that the ANN model has good applicability and reliability in numerical simulations, with its predicted flow stress showing high consistency with the experimental data. The ANN model developed in this study can effectively predict the rheological stress of FeCrAl alloys during hot deformation. It provides methodological support for high-fidelity constitutive modeling of the flow stress of FeCrAl alloys and offers a reliable constitutive model for simulating the thermomechanical load response behavior of FeCrAl alloys.

Schlagwörter

Stichwörter der Autor:innen

artificial neural networkconstitutive modelhot deformation behavior

Autor:innen und Institutionen

  • School of Mechanical and Electrical Engineering, Jiangxi University of Science and Technology, Ganzhou 341000, China.
  • Zhejiang Key Laboratory of Data-Driven High-Safety Energy Materials and Applications, Ningbo Key Laboratory of Special Energy Materialss and Chemistry, Ningbo Institute of Materials Technology and Engineering, Chinese A…
  • Qianwan Institute of CNITECH, Ningbo 315336, China.
  • School of Materials Science and Engineering, China University of Petroleum (East China), Qingdao 266580, China.

Förderung

  • The Key R & D Projects of Zhejiang Province
  • The Ningbo Major Research and Development Plan Project
  • National Natural Science Foundation of China, the project of the key technology for virtue reactors from NPIC
  • Ningbo Major Research and Development Plan Project
  • Key R & D Projects of Zhejiang Province
  • National Natural Science Foundation of China
  • project of the key technology for virtue reactors from NPIC

Zitieren

APA

Li, C., Chen, S., Du, S., Yu, J., & Zhang, Y. (2025). Development of Constitutive Relationship for Thermomechanical Processing of FeCrAl Alloy to Predict Hot Deformation Behavior. Materials, 18(13), 3007. https://doi.org/10.3390/ma18133007

Vancouver

Li C, Chen S, Du S, Yu J, Zhang Y. Development of Constitutive Relationship for Thermomechanical Processing of FeCrAl Alloy to Predict Hot Deformation Behavior. Materials. 2025;18(13):3007. doi:10.3390/ma18133007

BibTeX
@article{Li2025,
  author = {Li, Chuan and Chen, Shuang and Du, Shiyu and Yu, Juhong and Zhang, Yiming},
  title = {Development of Constitutive Relationship for Thermomechanical Processing of FeCrAl Alloy to Predict Hot Deformation Behavior},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {13},
  pages = {3007},
  doi = {10.3390/ma18133007}
}
Kostenlos starten →