EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Phase Transformation Kinetics During Post-Weld Heat Treatment in Weldments of C-250 Maraging Steel

Mercedes Andrea Duran, Pablo Peitsch iD, Hernán Gabriel Svoboda

Materials · 16.06.2025 · 18 (12) · 2820

DOI: 10.3390/ma18122820 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 16.06.2025. Verfasst von Mercedes Andrea Duran und 2 weiteren Autor:innen. Beteiligte Einrichtung: Facultad de Ingeniería, Universidad de Buenos Aires, GTSyCM3, Buenos Aires C1053ABH, Argentina. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: PIDDEF, Universidad Nacional de Hurlingham, UNAHUR.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Welding of maraging steels leads to a microstructural gradient from base material (BM) to weld metal (WM). During post-weld heat treatment (PWHT) the precipitation and reverted austenite (γr) reactions will occur defining the mechanical properties. These reactions are affected by the microstructure and local chemical composition of each zone in the “as welded” (AW) condition. This effect has not been clearly described yet nor the evolution of the microstructure. The objective of this work was to analyse the phase transformations at the different zones of the welded joint during the PWHT to explain the microstructure obtained at each zone. Samples of C250 maraging steel were butt-welded by GTAW-P (Gas Tungsten Arc Welding—Pulsed) process without filler material. The AW condition showed an inhomogeneous microhardness profile, associated with a partial precipitation hardening in the subcritical heat affected zone (SC-HAZ) followed by a softening in the intercritical (IC-HAZ) and recrystallized heat affected zone (R-HAZ). A loop-shaped phase was observed between low temperature IC-HAZ and SC-HAZ, associated with γr, as well as microsegregation at the weld metal (WM). The microstructural evolution during PWHT (480 °C) was evaluated on samples treated to different times (1–360 min). Microhardness profile along the welded joint was mostly homogeneous after 5 min of PWHT due to precipitation reaction. The microhardness in the WM was lower than in the rest of the joint due to the depletion of Ni, Ti and Mo in the martensite matrix related with the γr formation. The isothermal kinetics of precipitation reaction at 480 °C was studied using Differential Scanning Calorimetry (DSC), obtaining a JMAK expression. The average microhardness for each weld zone was proposed for monitoring the precipitation during PWHT, showing a different behaviour for the WM. γr in the WM was also quantified and modelled, while in the IC-HAZ tends to increase with PWHT time, affecting the microhardness.

Schlagwörter

Stichwörter der Autor:innen

maraging steelspost-weld heat treatmentprecipitationreverted austenitewelding

Autor:innen und Institutionen

  • Facultad de Ingeniería, Universidad de Buenos Aires, GTSyCM3, Buenos Aires C1053ABH, Argentina.
  • Laboratorio de Investigación Aplicada a la Producción y el Trabajo, Universidad Nacional de Hurlingham (UNAHUR), Hurlingham B1688AXC, Argentina.
  • División de Transformaciones de Fase, Gerencia Materiales, Comisión Nacional de Energía Atómica, Buenos Aires C1429BNP, Argentina.
  • Instituto de Tecnologías y Ciencias de la Ingeniería (INTECIN), CONICET-Universidad de Buenos Aires, Buenos Aires C1120AAQ, Argentina.

ORCID-Profile: Pablo Peitsch

Förderung

  • PIDDEF
  • Universidad Nacional de Hurlingham
  • UNAHUR
  • CNEA
  • FIUBA
  • CONICET

Zitieren

APA

Duran, M. A., Peitsch, P., & Svoboda, H. G. (2025). Phase Transformation Kinetics During Post-Weld Heat Treatment in Weldments of C-250 Maraging Steel. Materials, 18(12), 2820. https://doi.org/10.3390/ma18122820

Vancouver

Duran MA, Peitsch P, Svoboda HG. Phase Transformation Kinetics During Post-Weld Heat Treatment in Weldments of C-250 Maraging Steel. Materials. 2025;18(12):2820. doi:10.3390/ma18122820

BibTeX
@article{Duran2025,
  author = {Duran, Mercedes Andrea and Peitsch, Pablo and Svoboda, Hernán Gabriel},
  title = {Phase Transformation Kinetics During Post-Weld Heat Treatment in Weldments of C-250 Maraging Steel},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {12},
  pages = {2820},
  doi = {10.3390/ma18122820}
}
Kostenlos starten →