EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Interplay of Carbon Content and Sintering Temperature on Microstructure and Mechanical Behavior in Ultrafine-Grained WC-10CoNiFe and WC-10Co Cemented Carbides

Ji Zhang, Kun Li, Yubo Chen, Cheng Qian, Shuailong Zhang, Huichao Cheng iD

Materials · 13.06.2025 · 18 (12) · 2789

DOI: 10.3390/ma18122789 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 13.06.2025. Verfasst von Ji Zhang und 5 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083, China. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

As a crucial component of cemented carbide, the binder phase exerts a profound influence on its microstructure and mechanical properties. In this study, ultrafine-grained WC-10CoNiFe and WC-10Co cemented carbides, with grain sizes ranging from 0.25 to 0.4 μm, were fabricated via powder mixing, forming, and sintering processes utilizing 0.4 μm WC powder as the starting material. The effects of carbon content (5.44–5.50 wt%) and sintering temperatures (1410–1500 °C) on the grain organization and mechanical properties of these cemented carbides were systematically investigated. The results revealed that WC-10CoNiFe achieved its optimal mechanical properties at a carbon content of 5.46 wt% and a sintering temperature of 1450 °C, exhibiting a flexural strength of 2999 MPa and a hardness of 1765 HV. Likewise, WC-10Co attained its peak performance at a carbon content of 5.48 wt% and a sintering temperature of 1410 °C, with a flexural strength of 3598 MPa and a hardness of 1853 HV. Remarkably, the finer grain size of the WC-10CoNiFe alloy (0.261 µm), compared to that of WC-10Co (0.294 µm), can be ascribed to the suppression of the dissolution–reprecipitation process by the multi-principal-element alloy binder. This study demonstrated the synergistic regulation of microstructure and mechanical properties in ultrafine-grained cemented carbides through the incorporation of a multi-principal-element alloy binder. This innovative strategy not only effectively refines the grain size but also endows the alloy with exceptional mechanical properties, offering a valuable new perspective for the research and development of high-performance cemented carbides.

Schlagwörter

Stichwörter der Autor:innen

carbon contentcemented carbidegrain sizemechanical propertiessintering temperature

Autor:innen und Institutionen

  • State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083, China.
  • Jiangxi Tungsten Advanced Materials Innovation Research Co., Ltd., Nanchang 330096, China.

ORCID-Profile: Huichao Cheng

Förderung

  • National Key Research and Development Program of China

Zitieren

APA

Zhang, J., Li, K., Chen, Y., Qian, C., Zhang, S., & Cheng, H. (2025). Interplay of Carbon Content and Sintering Temperature on Microstructure and Mechanical Behavior in Ultrafine-Grained WC-10CoNiFe and WC-10Co Cemented Carbides. Materials, 18(12), 2789. https://doi.org/10.3390/ma18122789

Vancouver

Zhang J, Li K, Chen Y, Qian C, Zhang S, Cheng H. Interplay of Carbon Content and Sintering Temperature on Microstructure and Mechanical Behavior in Ultrafine-Grained WC-10CoNiFe and WC-10Co Cemented Carbides. Materials. 2025;18(12):2789. doi:10.3390/ma18122789

BibTeX
@article{Zhang2025,
  author = {Zhang, Ji and Li, Kun and Chen, Yubo and Qian, Cheng and Zhang, Shuailong and Cheng, Huichao},
  title = {Interplay of Carbon Content and Sintering Temperature on Microstructure and Mechanical Behavior in Ultrafine-Grained WC-10CoNiFe and WC-10Co Cemented Carbides},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {12},
  pages = {2789},
  doi = {10.3390/ma18122789}
}
Kostenlos starten →